This is the Novak Rooster Crawler Reversible Electronic Speed Control.
Compatible with single and dual Brushed motor crawler applications
such as a single 27-turn motor
or dual 35-55-turn lathe motors.
FEATURES: Two specific crawling driver profiles that feature zero reverse delay
and high-powered drag brakes (or "hill or "hold" brakes)
Built-in cut-off protection prevents batteries from going below
the critical safety voltage level
User replaceable input harness
Heavy duty 6V/5A BEC
Radio priority and polar drive circuitry
High-efficiency heat sink
Power output for optional 6V fan (available separately, NOVC5648)
Water resistant case
Thermal overload protection
120 day warranty
INCLUDES: Novak Rooster Crawler Electronic Speed Control with instructions
Tamiya style JST battery connector, use-replaceable input harness
and double-sided tape
REQUIRES: Installing in vehicle and connecting to motor and battery
SPECS: Input Voltage: 4-7 / cells (1.2V per cell) or 2 cells
Size: 1.54" x 1.18" (39 x 30mm)
Weight: 2.66oz (75.5g) w/wires; 1.57oz (44.5g) w/o wires
On-Resistance: 0.0014 ohms (forward); 0.0028 ohms (reverse)*
Rated Current: 400A* (forward)
Braking Current: 200A*
BEC: 6.0V/5.0A
Motor Limit 27-turn Brushed (at 6 cells )
Discrete Steps: 256 Forward; 256 Reverse
Battery Plug: Tamiya type
Drive Profiles: 2
Status LEDs: 2
Voltage Cut-off: 6.25V ( Profiles)
*MOSFET rating at 25°C junction temperature
jxs 7/10/07
ir/jxs
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators