View Larger Picture

Tower Catalog Page:	141
E-mail This Page To A Friend

              This is the Novak Crawler Sintered Brushless Motor
                      and Electronic Speed Control System.

FEATURES:   18.5 Turn Motor Features-
          Designed for car applications that require precise movement control
            and for vehicles that require super low speeds
          Ideal for vehicles with separate transmissions like the Tamiya Clod
            Buster
          Sensor-based technology for lots of starting torque, low speed
            driveability and low cogging for smooth acceleration and coasting
          High strength rotor and larger, more rugged front bearing for extra
            durability and long life
          Aluminum ribbed end bells for additional cooling
          Low resistance Direct-Solder Wiring Tabs for flexible soldering
            options
            ESC Features-
          2 Driving Profiles, one for normal motor rotation and one for reverse
            motor rotation
          Built-in LiPo cutoff protection (can be activated in either throttle
            profile)
          Brushless throttle profiles feature Zero Reverse Delay and adjustable
            drag brakes (or "hill" or "hold" brakes)
          User-friendly program interface with four status LEDs
          Fits in popular 1/10 scale electric R/C cars
          Variable Throttle Step
          One-Touch Set-Up
          Radio priority circuitry
          Water resistant case
          Gold plated PCB Direct-solder wiring tabs
          User-replaceable input harness
          Thermal overload protection
          Factory installed power capacitor
          Power output for optional 6V accessory fan, not included (NOVC5648)
          120 day warranty on both components

INCLUDES: Crawler Electronic Speed Control
          18.5 Turn Sintered Crawler Motor, NOVC3419

SPECS:      Motor-
          Number of Turns: 18.5
          Design: Sensor-based
          Input Voltage: 4-7 cells (1.2V/cell) or 2S LiPo cells
          Watts: 119
          KV (unloaded): 2,700 RPM/Volt
          Motor Size: 2.08"L X 1.41"D (52.8mm x 35.8mm)
          Shaft Diameter: .0125" (3.2mm)-accepts all existing pinion gears
          Motor Weight: 6.73 oz. (191 grams)
          Bearing: Oversized (1/2" x 3/16" Front, Standard Rear (3/8" x 1/8")
          Magnet: One-piece multi-pole cylindrical high-strength sintered
            Neodymium
            Electronic Speed Control-
          Input Voltage: 4-7 cells (1.2 VDC/cell) or 2S LiPo cells
          Size: 1.54 x 1.18" (39 x 30mm)
          Weight: 2.84 oz.(80.7g) with wires, 1.49 oz (42.2g) w/o wires
          Throttle Programs: 2
          Status LEDs: 4
          BEC: Heavy-duty 6.0 volt/5.0 amp
          On-Resistance: 0.0012 ohms (per each phase-3)
          Rated and Braking Current: 120 amps
          Voltage Cut-off: 6.25V (with LiPo cut-off circuitry enabled)
          Discrete Steps: 1024 (512 forward, 512 brake/reverse)
          Motor/Battery Wire: 14-Gauge Silicone

                                                                   jxs 07/10/07
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators