This is the 1/10 scale electric powered, radio controlled,
Associated Factory Team B44 4WD off-road buggy kit.
FEATURES: Chassis: 0.10" (2.5mm) thick woven carbon fiber main chassis and top
plate, composite front bulkhead and rear chassis plate
Drive: Four wheel shaft driven
Ball Diffs: Lightened, front and rear
Bearings: Full set
Shocks: Factory Team aluminum threaded shocks with gold shock shafts
and blue Factory Team aluminum shock bushings
Shock Oil: 25wt (ASCC8079) and 35wt (ASCC8080) silicone
Shock Springs: Silver front (ASCC4402) and Green rear (ASCC4386)
Shock Towers: 0.12" (3mm) thick woven carbon fiber
Slipper Clutch: Externally adjustable, dual pad design
Spur Gear: 48 pitch, 84 tooth nylon construction (ASCC9653)
Motor Mount: Slotted for easy installation
Dog Bones: Front and Rear hardened steel CVA univerals (black)
Front Tires: 1.35" (53mm) wide, 2.2" diameter (ASCC9769)
Rear Tires: 1.53" (38mm) wide, 2.2" diameter (ASCC9590)
Front Wheels: 2.2" diameter, 1.03" (26mm) wide white dish (ASCC9767)
Rear Wheels: 2.2" diameter, 1.42" (36mm) wide white dish (ASCC9589)
Foam Inserts: Included for front and rear
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes
the angle of the front tires as viewed from the top
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Factory Team: Thumb screws, molded battery straps, servo mounts and
titanium turnbuckles
Body: Clear polycarbonate buggy body with 6.5 high downforce wing,
clear undertray, overspray film, die-cut window mask and decals
Steering: Ball bearing steering with adjustable servo saver
INCLUDES: One B44 4WD buggy kit with oil-filled shocks, clear body, tires, foam
inserts, wheels, titanium turnbuckles, Factory Team parts and
photo-illustrated manual
REQUIRES: Radio: 2ch with one servo
Radio Batteries: (8) AA size
Pinion Gear: number of teeth to be determined by motor
Motor: Stock or modified of modeler's choice
Electronic Speed Control: Compatible with selected motor
Battery: 6-cell saddle configuration
Charger: AC/DC charger timed or peak for 6-cell battery
Building and track equipment
SPECS: Length: 14.56" (370mm)
Width: 9.84" (250mm)
Height: Not Available
Wheelbase: 11.02" (280mm)
Ground Clearance: Not Available
Weight: 3.94lbs (1788g)
Gear Ratio: 2.5:1
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x5/16" Front and Rear Ball Diff 2 DTXC1413
4 3/8x5/8" Front and Rear Ball Diff 2 DTXC1437
2 .187x.196" Center Slipper 1 ASCC7935
4 3/16x3/8" Front and Rear Gearbox 2 DTXC1423
2 .78x.250" Steering Bellcrank 1 ASCC9746
2 .125x.250" Steering Bellcrank 1 ASCC9746
4 3/16x3/8" Front Steering Blocks 2 DTXC1423
2 3/16x3/8" Inner Rear Hub Carrier 1 DTXC1423
2 3/16x1/2" Outer Rear Hub Carrier 1 ASCC7935
kpm11/06/2007
ir/jxs
– If you need more information, use these Associated resources – |
Web Site: http://www.rc10.com/
Phone: 949-544-7500
|
|
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630
|
Click here for Units of Measure Conversion Calculators
| 
Eligible: Yours for 3
E-mail This Page To A Friend
Primary Accessories
Primary Accessories
