View Larger Picture

E-mail This Page To A Friend

              This is the RB Concept V12 R-3 Touring Car Engine.
                               EFRA/IFMAR Legal.

FEATURES: Vacuum molded alloy crankcase designed and developed by Rody Roem
          Four port liner-three intake, one exhaust, ABC construction,
            "A"luminum piston with a "B"rass cylinder liner that is "C"hrome
            plated
          CNC machined lightened piston for greater power
          Aluminum body slide valve carburetor with removable 5.4mm diameter
            venturi
          Bi-Turbo A3 crankshaft with very aggressive timing
          Six fin orange colored aluminum cooling head
          Knife-shaped aluminum connecting rod with reduced weight to aid in
            acceleration at low RPM and optimize internal gas flow

INCLUDES: RB Concept V12 R-3 Buggy Engine with CP-02 Turbo 6 glow plug,
            slide valve carburetor, exhaust gasket and instructions

REQUIRES: Fuel: Car blend with 10%-25% nitro content
          Inline Pipe Set, RB Concept #E1751-195401 pipe and manifold
            recommended
          Glow plug wrench and track equipment

SPECS:    Displacement: .12cu in (2.11cc)
          Bore: 13.70mm
          Stroke: 14.25mm
          Intake Ports: 3
          Exhaust Ports: 1
          Crankshaft: 11.5mm SPT
          Carburetor Intake Diameter: 5.4mm
          Carburetor Settings: Main Needle, 5 turns from closed
                               Idle Needle, 2.5 turns from closed
          Weight: 7.5oz (213g)

          Distance from Backplate to end of Crankshaft: 3.1" (80mm)
          Height from Mounting Tab to top of Cylinder Head: 3.3" (83mm)
          Center of Mounting Holes Same Side: 0.43"  (11mm)
          Center of Mounting Holes Opposite Side: 1.2" (31.5mm)
          Mounting Hole Diameter: 0.13" (3.3mm)
          Distance from Front Bearing to End of Crankshaft: 1.2" (30mm)
          Width of Crankcase Below Mounting Tabs: 1" (25.5mm)
          Width at Mounting Tabs: 1.5" (39mm)
          Distance/Bottom of Crankcase to Crankshaft Center: 0.49" (12.5mm)
          Distance/Exhaust Port Center to Crankshaft Center: 0.90" (23mm)
          Diameter of Cooling Head: 1.9" (49mm)

COMMENTS: The following RB Products Turbo Glow Plugs are compatible with this
            engine;
            CP-02 Turbo 5, RBDG1020          CP-02 Turbo 7, RBDG1040
            CP-02 Turbo 6, RBDG1030          CP-02 Turbo 8, RBDG1050

                                                                    jxs 9/28/07
                                                                         ir/jxs



– If you need more information, use these RB Products resources –

E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707


 
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034  








Click here for Units of Measure Conversion Calculators