This is the RB Concept TM523 Engine and Exhaust Kit
for the Traxxas Revo.
FEATURES: Pre-installed mount makes engine changeover quick and easy
Uses clutch assembly and air filter from original engine
Ready for easy bolt-on installation of Traxxas EZ-Start used with
original engine
Aluminum header and tuned pipe with pressure tap installed-black in
color
Eight fin orange colored aluminum head
Slide valve
INCLUDES: RB Concept TM523 Engine with , tuned pipe, header, two
springs, pre-installed engine mount, exhaust gasket and
instructions
REQUIRES: Fuel: Car blend with 10%-25% nitro content
wrench and track equipment
SPECS: Displacement: 0.23cu in (3.78cc)
Bore: 17.00mm
Stroke: 16.64mm
Intake Ports: 7+2
Exhaust Ports: 3
Crankshaft: TRX Bi-Turbo 14.20mm
Intake Diameter: 8mm
Settings: Main Needle, 6 turns from closed
Idle Needle, 5 turns from closed
Weight: 10.7oz (305g)
Distance from Backplate to end of Crankshaft: 3.2" (82mm)
Height from Mounting Tab to top of Cylinder Head: 3.6" (91mm)
Center of Mounting Holes Same Side: 0.52" (13.4mm)
Center of Mounting Holes Opposite Side: 1.4" (37mm)
Mounting Hole Diameter: 0.12" (3.2mm)
Distance from Front Bearing to End of Crankshaft: 1.04" (26.5mm)
Width of Crankcase Below Mounting Tabs: 1.2" (30mm)
Width of Mounting Tabs: 1.7" (44.5mm)
Distance/Bottom of Backplate to Crankshaft Center: 0.65" (16.5mm)
Distance/Exhaust Port Center to Crankshaft Center: 1.2" (31mm)
Diameter of Cooling Head: 2.2" (55mm)
Distance/Center of Front Mounting Hole/End of Crankshaft: 2.2 (55mm)
jxs 8/28/07
ir/jxs
– If you need more information, use these RB Products resources – |
E-mail: b.howard@rb-usa.com
Web Site: http://www.rb-usa.com/
Phone: 817-876-9707
|
|
Postal Address:
RB Products
5611 COLLEYVILLE BLVD #160
COLLEYVILLE, TX 76034
|
Click here for Units of Measure Conversion Calculators
|