View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

    This is the radio controlled, electric powered, almost-ready-to-fly,
               Multiplex Gemini Park Flyer Trainer airplane.
                       For Intermediate Modeler/Fliers.

FEATURES: Construction: Elapor foam white in color, two piece fuselage
          Wings: One-piece all foam
          Radio Compartment: Accessible under wing
          Landing Gear: Main, prebent fixed wire 0.16" (4mm) diameter
                        Tailgear, prebent fixed wire 0.039" (1mm) diameter
          Wheels: Main, two Elapor foam 2" (52mm) Tailwheel, 1" (26mm) foam
          Wheel Pants: Two-piece Elapor foam
          Aileron Control: Single servo
          Canopy: Single, tinted
          Spinner: Elapor foam 2.5" (63mm)
          Decals: Peel and stick application with silver and blue accents
          Building Time: Ready to fly in several hours

INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
            hardware, pre-bent 0.16" (4mm) wire main landing gear, two main
            wheels and one tailwheel, spinner, canopy, decal sheet and photo-
            illustrated instructions

REQUIRES: Electric Power Set: Multiplex Gemini Power Set (MPUG3224)
            recommended, consists of HiMax HC 2816-0890 motor
            APC 10 x 5E Prop, 4mm tapered collet spinner driver and ESC
          Battery: 2100mAh 3S1P-11.1V, MPUP5731
          Radio: 4 channel with micro receiver
          Servos: Four mini size, 2-Aileron, 1-Elevator, 1-Rudder
          6" (152mm) Servo Extensions: Three for aileron servos
          Misc. Items: Building and field equipment

SPECS:    Wingspan:     36.2" (920mm)
          Wing Area:    527 sq in (34 sq dm)
          All Up Weight: 29.6oz (840g) approx, with recommended equipment
          Wing Loading: 7.21 oz/sq ft (22g/sq dm) FAI (min)
          Length:       36.2" (920mm)
          Airfoil: Semi-symmetrical
          Center of Gravity: Within the range of 2.9" (75mm) aft of the leading
            edge nose of the top wing, molded-in dimples adjacent to the
            cabane indicate correct balance point
          Control Throws-
            Elevator: Up and Down 0.47/0.39" (12/10mm) +/-
            Rudder: Right to Left 0.79" (20mm)
            Ailerons: Up & Down 0.63/0.47" (16/12mm) +/-

COMMENTS: No info is given on converting this model to glow power.
          This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                    jxs 9/13/07



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators