This is the Novak Goat Crawler Brushless/Brush Electronic Speed Control.
FEATURES: Two specific crawling driver profiles that feature zero reverse delay
and high-powered drag brakes (or "hill or "hold" brakes)
Built-in cut-off protection prevents batteries from going below
the critical safety voltage level
User replaceable input harness
Heavy duty 6V/5A BEC
Radio priority and polar drive circuitry
High-efficiency heat sink
Power output for optional 6V fan (available separately, NOVC5648)
Water resistant case
Thermal overload protection
120 day warranty
INCLUDES: Novak Goat Crawler Electronic Speed Control with instructions
Tamiya style JST battery connector, use-replaceable input harness
and double-sided tape
REQUIRES: Installing in vehicle and connecting to motor and battery
SPECS: Foward/Reverse: Forward, Drag Brake, Reverse
Input Voltage: 4-7 / cells (1.2V per cell) or 2 cells
On-Resistance: 0.0012 ohms (brushless per phase)
0.0012 ohms (brushed)
Size: 1.54" x 1.18" (39 x 30mm)
Weight: 1.49oz (42.2g) w/o wires
Rated & Braking Current: 120 amps (brushless per phase);
120 amps (brushed)
Power Wires:14-Gauge
BEC: 6.0V/5.0A
Motor Limit: 18.5-turn (brushless);
27-turn stock motor (brushed mode)
Discrete Steps: 512 Forward; 512 Reverse
Battery/Motor plug: Tamiya (battery); None (motor)
Voltage Cut-off: 6.25V (when LiPoly cutoff circuitry is enabled)
tlw 9/20/07
ir/jxs
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators