E-mail This Page To A Friend

     This is the 1/10 scale glow powered, radio controlled, ready to run
                     Cen Racing ATX2 Talon NX Off-Road Buggy.

FEATURES: Chassis: Anodized aluminum 0.098" (2.5mm) thick
          Drive: Four wheel shaft
          Radio: Cen Skyion DSX 27MHz AM radio system with metal gear, ball
            bearing high torque servos, ten model memory, sealed receiver
            and battery box, transmitter has charge jack
          Engine: NX 3.0 .18 cu in (3.0cc) with pull starter, slide valve
            carburetor and glow plug
          Exhaust: Composite body dual chamber tuned pipe with aluminum
            manifold
          Clutch: Two shoe, teflon
          Fuel Tank: 4.2 oz (125cc)
          Transmission: Two speed adjustable
          Ball Bearings: Full set included
          Shocks: Oil filled composite bodied with 0.12" (3mm) thick aluminum
            shock towers
          Tires: 2" (51mm) wide, 4" (101mm) diameter with foam inserts
          Wheels: Plastic, 1.9" (48mm) wide 2.2" (56mm) diameter, white in
            color
            **many aftermarket 1/10 scale tires and wheels will also fit**
          Body: Trimmed and painted buggy with rear wing
          Bumper: Front plastic kick-up
          Suspension: Independent, adjustable pivot ball
          Caster: Adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of
            the tires from vertical when viewed from front or behind vehicle
          Steering: Bell crank type with servo saver

INCLUDES: Glow powered RTR Cen ATX2 Talon NX Buggy with .18 cu in (3.0cc)
            pull start engine, foam inserts, wheels, Skyion DSX 2 channel radio
            with two heavy duty servos, air filter, glow plug, painted body
            and manual

REQUIRES: AA Batteries: 12 for radio system
          Glow Fuel: Car blend with 20-30% nitro content
          Track Equipment: Fuel bottle, glow starter, building equipment

SPECS:      Vehicle-
          Length:          16.3" (414mm)
          Width:           12.8" (326mm)
          Height:           7.1" (181mm) at rear wing, highest point
          Weight:           5.6lb (2.5kg)
          Wheelbase:       11.6" (295mm)
          Front Tread:     10.7" (272mm)
          Rear Tread:      10.9" (278mm) side to side center of tires
          Front Track:     12.2" (311mm)
          Rear Track:      12.5" (317mm) side to side outer edges of tires
          Ground Clearance: 1.8" (45mm)

            Body-
          Length:          15"   (380mm)
          Width:            3.5" (88mm)
          Height:           3.9" (100mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.    Size     Location           Qty.  Bearing Set
             1    12x18mm    Clutch Gear         1     DTXC1597
             1     5x11mm    One Way Gear        1     DTXC1547
             1    10x15mm    Brake Seat          1     DTXC1595
             2     5x11mm    Fr Drive Gear       1     DTXC1547
             2     5x8mm     Clutch Bell         1     DTXC1523
             2    10x15mm    Fr Gearbox          1     DTXC1595
             2    10x15mm    Rear Gearbox        1     DTXC1595
             4     5x11mm    Fr Hubs             2     DTXC1547
             4     5x11mm    Rear Hubs           2     DTXC1547
             2     5x8mm flanged  Servo Saver    1     DTXC1527

                                                                    jxs 2/27/08
                                                                         ir/jxs



– If you need more information, use these CEN Racing resources –

E-mail: customerservice@cenracing.com
Web Site: http://www.cenracing.com/
Phone: 714-792-1923


 
Postal Address:
CEN Racing
GENKA TRADING COMPANY
1800 E MIRALOMA AVE, STE F
PLACENTIA, CA 92870  








Click here for Units of Measure Conversion Calculators