View Larger Picture

E-mail This Page To A Friend

      This is the 1/8 scale glow powered, radio controlled, ready to run
                        Cen Racing Matrix C-1 Buggy.

FEATURES: Chassis: 7075 T-6 aluminum 0.12" (3mm) thick with front and rear
            stiffeners
          Drive: Four wheel shaft
          Radio: Skyion DX-Pro 3 FM three-channel 75MHz, digital computer radio
            system, with 10 model memory and high-torque ball bearing servos
          Engine: Cen .26 cu in (4.2cc) pull-starter
            2 needle slide valve carburetor, ABC piston/sleeve
            construction, blue anodized cooling head, glow plug,
          Exhaust: Aluminum tuned pipe, polished natural finish
          Clutch: Composite three shoe with aluminum flywheel & 13 tooth bell
          Body: Cen "Intruder" constructed of Lexan
          Universals: Front, rear and center universals
          Transmission: Single speed with 46 tooth steel spur gear
          Ball Bearings: Full set included
          Fuel Tank: 4.2oz (125cc) dual pick up with internal and external
            filters
          Shocks: Machined anodized aluminum 16.5mm diameter bodies, 3.5mm
            diameter shafts, oil-filled coil over design, 0.16" (4mm) thick
            aluminum shock towers
          Main Gear: 46 tooth
          Pinion Gear: 13 tooth steel
          Gearboxes: Sealed
          Differentials: Sealed, six gear planetary design
          Brakes: Four vented metal discs, adjustable front and rear controls
          Tires: Xcellerator 3.34" (110mm) diameter,  1.69" (43mm) width
          Wheels: Lightweight racing, white in color, 3.16" (80mm) diameter,
           1.69" (43mm) width (17mm hex size)
          Bumpers: Front and rear plastic
          Suspension: Fully adjustable, captured hinge pins instead of e-clips
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Ackerman: Adjustable three position, Ackerman describes the effect of
            the inside front wheel turning faster than the outside front wheel
            during turns
          Steering: Bell crank type with servo saver

INCLUDES: Glow powered RTR Cen Racing Matrix C-1 Buggy with painted
            body, tires, foam inserts, wheels, Skyion DX-Pro radio system
            two heavy duty servos, .26 cu in (4.2cc) engine, instructional DVD
            printed manuals, transponder mount, laydown steering servo and
            radio tray

REQUIRES: AA Batteries: 12 for radio system
          Glow Starter: 1.2 volt
          Misc. Items: Fuel bottle, building and track equipment
          Fuel: 2-cycle glow fuel with 10%-20% nitromethane, 16% lubricant-
            Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life.  In the
            past, the conventional lubricant content used in fuel was 18%.  But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower.  These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:      Vehicle-
          Length: 19" (485mm)
          Width: 12" (305mm)
          Height: 7.5" (190mm)
          Weight: 7.4 lbs (3357g) approx.
          Wheelbase: 13 - 13.2" (330 - 336mm) wheels on-center front-to-rear
          Front and Rear Tread: 10.5" (267mm)
          Front and Rear Track:  12" (305mm)
          Ground Clearance: 1.5" (38mm)
            Body-
          Length: 14.25" (362mm)
          Width:  7.75" (197mm)
          Height: 3.75" (95mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                  Qty.  Bearing Set
             4   8x16mm   Front and Rear Diffs         2      DTXC1585
             2   8x16mm   Center Differential          1      DTXC1585
             4   8x16mm   Front Knuckle Arms           2      DTXC1585
             4   8x16mm   Front and Rear Gearbox       2      DTXC1585
             2   8x16mm   Rear Uprights (outer)        1      DTXC1585
             2   15x24mm  Rear Uprights (inner)        1      ARZC1029
             4   6x10mm   Bellcrank                    2      DTXC1561
             2   5x10mm   Clutchbell                   1      DTXC1535

          Body pictured on the box is painted white with blue trim.

                                                                   jxs 10/31/07
                                                                         ir/jxs
                                                                  kpm01/24/2008



– If you need more information, use these CEN Racing resources –

E-mail: customerservice@cenracing.com
Web Site: http://www.cenracing.com/
Phone: 714-792-1923


 
Postal Address:
CEN Racing
GENKA TRADING COMPANY
1800 E MIRALOMA AVE, STE F
PLACENTIA, CA 92870  








Click here for Units of Measure Conversion Calculators