Tower Catalog Page:	60
E-mail This Page To A Friend

             This is the Grand Wing Servo E-Starter Foam Trainer.
          This kit is designed for the intermediate modelers/fliers.

FEATURES: Construction: Easy interlocking foam with built-in thrust angles
          Wings: One-piece foam construction
          Radio Compartment: Molded into fuselage
          Cowling: Plastic
          Landing Gear: Pre-bent 2mm diameter wire main gear with tail gear
            wire
          Wheels: Main, two 3" (76.2mm) ultralite plastic, one 1" (25.4mm)
            tailwheel
          Hardware: Included
          Motor Mount: Included
          Warranty: Grand Wing Servo Company Ltd., guarantees this kit free
            from defects in both materials and workmanship at date of purchase.

INCLUDES: All foam fuselage halves,wing,and tail sections,plastic cowling,2mm
            main landing gear, 1.2mm tail wire, 3" (76.2mm) diameter main
            wheels, 1" (25.4mm) diameter tail wheel, plastic battery seat,
            decals and photo-illustrated instructions

REQUIRES: Speed Control: 20A recommended
          Battery: 7.2-8.4V AAA 500-730mAh NiMh or
            7.2-8.4V 270-400mAh 2/3 AA NiCd or AA 600mAh NiCd
          Charger: Timed or peak
          Radio: 3-4 channel
          Servos: 3 pico or naro (micro or mini) servo
                      (1-ailerons, 1-elevator, 1-rudder)
          Servo Extension 6": For ailerons
          Building and field equipment

SPECS:    Wingspan: 37.8" (960mm)
          Wing Area: 265sq in (17.1sq dm)
          Weight: 14.1 - 17.6oz (400 - 500g)
          Wing Loading: 7.7 - 9.5oz/sq ft (23.4g - 29q/sq dm)
          Length: 30.54" (725mm)
          Airfoil: High wing flat bottom
          Center of Gravity: Marked on the bottom of the wing, approximately
            2.9" (73mm) behind leading edge of wing at fuselage side
          Control Throws-
            Ailerons: Up & Down     5/16"(7.9mm)
            Elevator: Up & Down     1/2" (12.7mm)
            Rudder: Right & Left    1/2"(12.7mm)

                                                                    jxs 8/07/08
                                                                         ir/jxs



– If you need more information, use these GWS resources –

E-mail: service@gws.com.tw
Web Site: http://www.gws.com.tw/
Phone: 909-594-4979


 
Postal Address:
GWS
GRAND WING SYSTEM USA, INC.
138 S. BRENT CIRCLE
CITY OF INDUSTRY, CA 91789  








Click here for Units of Measure Conversion Calculators