View Larger Picture

Instruction Manuals:	Manual 1 (27 MB)
Tower Catalog Page:	102
E-mail This Page To A Friend

   This is the 1/10 scale electric powered, radio controlled, ready to run
                      HPI Ford Mustang GT-R Touring Car.

FEATURES: Chassis: Bathtub type 0.078" (2mm) thick with quick change battery
            holder and adjustable motor and radio equipment positions to
            easily convert from street/touring to drift driving with no extra
            parts to buy
          Drive: Four wheel shaft
          Radio: HPI TF-1 AM pistol grip radio system with RF-1 receiver, SF-
            1 steering servo
          Electronic Speed Control: EN-1 with reverse
          Motor HPI Saturn 27T 540 size, HPIC1144
          Charger: AC 120V wall type
          Battery: 7.2V 1500mAh 6-cell stick pack with Standard connector
          Shocks: Composite bodied
          Gearboxes: Closed
          Differentials: Front and rear bevel-type
          Transmission: Single-speed
          Tires: T-Drift 2.48" (63mm) diameter, 1.02" (26mm) wide
          Wheels: Six spoke, chrome Gram Lights 57S-Pro
            2.08" (53mm) diameter, 1.02" (26mm) wide
          Bumpers: Front, foam
          Body: Pre-painted Ford Mustang GT-R body, adjustable body
            mounts to accomodate a large variety of touring car bodies
          Suspension: Full-time independent
          Caster: Non-adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Non-adjustable, camber refers to the angle of the tops
            of the tires from vertical when viewed from front or behind vehicle
          Steering: Bell-crank type with servo saver

INCLUDES: HPI E10 on-road Ford Mustang GT-R Touring Car with painted
            body, radio, ESC, battery, charger, wheels, tires, 27T motor
            and manual                                                        _

REQUIRES: Radio Batteries: (8) AA size
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:     14.8" (375mm)
          Width, Adjustable: 7.32, 7.56, 7.80" (186, 192, 198mm)
          Height: 5.25" (133.35mm)
          Weight:   2.8 lbs (1270g) without body
          Wheelbase:    10" (255mm)
          Drive Ratio: 7.48:1
           Tread: Front- 6.5" (165mm)  (side-to-side at wheel centers)
                  Rear - 6.8" (173mm)
          Front Track: 7.5" (190mm)
          Rear Track: 7.75" (197mm)
          Spur Gear: 65T
          Tires- Front and Rear: 2.48" x 1.02" (63x26mm)
            BODY-
          Length: 17" (431.8mm)
          Width: 8" (203.2mm) at rear wheels (widest point)
                 7.75" (196.85mm) behind from wheels (thinnest point)
          Height: 5.5" (139.7mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                Bearing Set Qty.
             2   12x18x4   Center drive shaft        DTXC1597  1

          Body pictured on the box is painted red
          For the assembled version without battery or radio, order HPIC2764.

                                                                   jxs 10/02/07
                                                                   tlw 10/04/07
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators