This is the 1/10 scale electric powered, radio controlled, Ready-To-Run
HPI E-Firestorm off-road Stadium Truck.
FEATURES: Chassis: Composite nylon contruction
Drive: Rear wheel with alloy steel dogbones
Motor HPI Firebolt 15 turn (#1146, we do not stock)
Radio System: HPI TF-1 2 channel AM Pistol Grip on 27MHz with trims
on steering and trottle, servo reverse on steering and ,
steering dual rates and one SF-1 standard servo (No charge jack)
Speed Control: HPI SC-15 Electronic Speed Control with reverse
Ball bearings: 14 total
Shocks: Four oil-filled, composite bodied
Gearbox: Rear, closed
Differential: Sealed planetary type with metal gears and dual pad
slipper clutch
Transmission: Single-speed, all metal gears
Tires: Front, Front Line asymmetric dual edge ribbed 2.12" (53mm)
wide and 2.2" inside diameter
Tires: Rear, Ground Assault tapered pin 2.12" (53mm) wide and 2.2"
inside diameter
Wheels: 2.2" inside diameter black 6-spoke wheels
Wheel Adapters: Aluminum 12mm hex adapters compatible with all HPI
1/10 scale rear truck wheels (hexs are used on front and rear)
Pinion Gear: 48 pitch, 19 tooth
Spur Gear: 48 pitch, 87 tooth
Body: DSX-2 painted stadium truck (color may vary from picture)
Suspension: Wide track, fully adjustable
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank type steering
Warranty Period: HPI warrants this product from defects in
materials and workmanship for a period of two years from date of
purchase
INCLUDES: Assembled HPI E-Firestorm off-road Stadium Truck with DSX-2 body,
2-channel pistol grip radio system with speed control, ESC,
15-turn motor, decals and instruction manual
REQUIRES: Radio Batteries: Eight AA size
Battery: 6- or 7-cell
Charger: AC/DC timed or peak for 6- or 7-cell battery
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 16.7" (425mm)
Width: 12.75" (324mm)
Height: 6" (152mm)
Wheelbase: 11.5" (292mm) adjustable
Front Tread: 10.75" (273mm)
Rear Tread: 11" (279mm) side-to-side at wheel centers
Front Track: 12.8" (325mm)
Rear Track: 12.9" (327mm) side-to-side at outer edges of wheels
Gear Ratio: 2.6:1
BODY-
Length: 16.25" (413mm)
Width: 6.25" (159mm)
Height: 4" (101mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10 Front Knuckle Arms 2 DTXC1535
4 5x10 Rear Hubs 2 DTXC1535
4 5x10 Gearbox 2 DTXC1535
2 10x15 Gearbox 2 DTXC1595
kpm11/27/2007
ir/jxs
jxs 11/13/07
Click here for Units of Measure Conversion Calculators
|