This is the Trinity 5-cell Vis-Pro 4600mAh Nickle Metal Hydride ()
Team Series Unassembled Battery Pack.
FEATURES: Matched cells (each battery in the pack has the same specs)
4600mAh AE size cells
"VIS" stands for "voltage increasing system" packs are matched with
a two second spread on run time, within three hundredths of a volt
and two points on the internal resistance number
INCLUDES: Five EP Power 4600 Vis-Pro cells
REQUIRES: Charger: Having Negative DeltaV or Zero DeltaV Peaking capabilities
Discharger: Having capabilities to properly discharge batteries
Soldering on battery wire - WSDC1000 and a connector - DTXC2260 or
connector of modeler's choice
Soldering Iron, HCAR0775, HCAR0776
Solder, STAR2000 WSDC4030
SPECS: Matched Cells - SPECS WILL VARY SLIGHTLY FROM BATTERY TO BATTERY:
Discharge Time (SEC): 469 seconds
Average Voltage (AVG/V): 1.227V
Discharge Rate (Disc): 35A
Milliwatt Hour (MWHR):4946
Internal Resistance (IR): 1.6
Cell Capacity (mAh): 4560
Charge Rate (Chg): 5.0A
Cutoff Voltage (Out): 0.90V
COMMENTS: Charger MUST be able to adjust the negative deltaV peak charge rate.
Heat or overcharging will deteriorate or damage cells.iM 5.23.07
Trinity recommends charging the battery at 5amps using .02-.03 peaks
detection voltage
tlw 1/14/08
ir/jxs
Click here for Units of Measure Conversion Calculators