This is the 1/8 scale radio controlled, nitro powered,
Hyper ST Pro Truggy Kit from Ofna.
Designed and tested by the Hobao International Racing Team.
FEATURES: Chassis: .12" (3mm) thick 7075 T-6 hardcoated aluminum with CNC
front, center and rear chassis braces and aluminum upper front plate
Drive: Four wheel shaft drive with front and rear, center universals
Exhaust: Polished dual chamber tuned pipe and manifold (header)
Body: Factory trimmed, clear polycarbonate with hard plastic wing,
overspray film applied, window mask and decals
Clutch: Racing type 3-shoe with CNC clutch shoes and 14 tooth bell
Wheels: Six spoke 3.81" (97mm) diameter, 2.83" (72mm) wide
Tires: High traction truggy 5.25" (133.35mm) diameter, 2.83" (72mm)
wide "Bulldog" pattern (Hobao Racing branded)
Suspension: Long travel, long C-hub with front and rear universals
and front and rear adjustable anti-roll bars
Camber: Adjustable front and rear (camber refers to the angle of the
tires from vertical when viewed from front or behind vehicle)
Ball Bearings: Full set, rubber sealed
Shocks: Big bore anodized aluminum bodied oil filled (300wt oil)
Shock Towers: CNC machined aluminum shock towers
Steering: Adjustable turnbuckles for front and rear steering
with laydown servo mounts
Brake: Dual disc
INCLUDES: Hyper ST Pro Truggy Kit with body, wheels, tires, carbon radio tray
tuned pipe, shocks, body, fuel bottle, and manual
REQUIRES: Engine: .21 Rear Exhaust, pilot shaft - OSMG2058
Radio: 2-Channel with 2 - FUTK09**
Radio Batteries: 12 AA size (8 for transmitter and 4 for receiver)
Glow Starter: 1.2 volt - DTXP3000
Starter Box: DTXP5701
Paint: Lexan specific spray or brush-on
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 10%-15%
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECS: Vehicle-
Length: 20.25" (514mm)
Wheelbase: 14.50" (368mm)
Width: 16.10" (409mm)
Weight: 9.5lbs (4.3kg)
Body-
Length: 19" (483mm)
Width: 8.5" (215mm) at widest point ahead of rear wheels
6.4" (164mm) at narrowest point in front of front wheels
Height: 5.3" (135mm)
COMMENTS: For Replacement Bearings Order;
Qty. Size Location Qty. Bearing Set
4 8x16mm Front & Rear Differential 2 DTXC1585
2 8x16mm Center Differential 1 DTXC1585
2 8x16mm Front Gear 1 DTXC1585
4 8x16mm Steering Knuckle 2 DTXC1585
2 8x16mm Rear Gear Box 1 DTXC1585
4 8x16mm Rear Universal Joint Shaft 2 DTXC1585
jxs 10/29/07
kpm01/03/2008
ir/jxs
– If you need more information, use these Ofna resources – |
E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910
|
|
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618
|
Click here for Units of Measure Conversion Calculators
|