This is the radio controlled, electric powered
Dumas Dehavilland DH-89 kit
FEATURES: Construction: Hand selected laser cut balsa
Vacuum molded nose cone, windshield, engine cowls, nacelles and
wheel pants
Control: Pull-pull cables
Control: Flexible control cables
Control: Wire pushrod
Servo Placement: Mounted in rails on
Scale Rigging: Functional flying wires and tail braces
INCLUDES: All balsa, lightweight colored (gray) tissue covering
two 2" (50.8mm) lightweight foam main wheels, hinges, rigging
wire, control cables, instruction manual, three full-size plan
sheets, acetate sheets for windows, and all hardware
to complete this kit
REQUIRES: Two GWS IPS (GWSG2021) motors (3.5:1 gear ratio)
3 channel radio system (minimum)
4 micro
One 25A ESC w/BEC for brushed motors (GPMM2025)
2 cell 1250mAh battery (GPMP0608)
GWS 7x6 props, (GWSQ2015)
Building and field equipment
SPECS: Wingspan: 42" (1066mm)
(CG): 1 5/8" (41.2mm) aft of the upper wing leading
edge at the root
Control Throws-
, Up and Down: 1/2" (12.7mm)
, Up and Down: 5/8" (15.9mm)
, Left and Right: 1" (25.4mm)
Comments: Motors are hardwired/soldered to speed control
jml 12/18/08
OA 4/29/08
ir/jxs
– If you need more information, use these Dumas resources – |
Web Site: http://www.dumasproducts.com/
Phone: 800-458-2828
|
|
Postal Address:
Dumas
909 EAST 17TH STREET
TUCSON, AZ 85719
|
Click here for Units of Measure Conversion Calculators
|