This is a Magnum XL28A 2-Stroke Glow Engine with Remote .
FEATURES: ABC construction (Aluminum piston, Brass sleeve, Chrome plated.
Remote needle to keep fingers away from spinning propeller
One-piece crankcase
Side exhaust
Dual ball bearings
Front-mounted carb with two needle adjustments
Expansion style muffler
Extra long crankshaft (XL)
TWO YEAR warranty
INCLUDES: One engine
One with remote
One muffler with pressure fitting installed
Two exhaust gaskets
Two M3x30 hex head muffler screws with split-washers
Two M3x5 carb screws
Two M3x12 hex head screws for remote bracket
Four 3mm split-washers
One hex wrench (2.5mm)
One instruction/spec/parts sheet
REQUIRES: , prop, spinner or spinner nut, and starting equipment.
SPECS: Bore: 18.5mm (.72")
Stroke: 8.5mm (.33")
Displacement: 4.57cc (.28 cu in)
Propeller: 9x5, 9x6, or 9x7
Practical rpm: 2,000-16,000 RPM
Power Output: .87 bhp
Crankshaft Threading: 1/4-28
Mounting holes on-center front to rear: 15mm (.59")
Mounting holes on-center side to side: 38mm (1.5")
Width of crankcase without mounting flanges: 30mm (1.18")
Overall height: 78mm (3.1")
Height from bottom of mounting flange to top of engine: 63mm (2.68")
Overall length: 95mm (3.74")
Length of crankshaft from drive washer out to tip: 22mm (.87")
Length of crankshaft that is threaded: 16mm (.63")
Weight w/muffler: 287g (10.09oz)
COMMENTS: Engine is made in China
8/30/01nna
ir/jl
Click here for Units of Measure Conversion Calculators
|