View Larger Picture

E-mail This Page To A Friend

   This is the 1/10 scale electric powered, radio controlled, ready to run
                       Tamiya Plasma Edge Off-Road Buggy.

FEATURES: Chassis: ABS plastic DF-02 bathtub style
          Drive: Four wheel shaft drive
          Motor: 540 size
          Radio: Tamiya 2-channel pistol grip, 27MHz AM with one standard
            servo, steering and throttle trim and reverse, transmitter does
            not have charge jack
          Electronic Speed Control: Tamiya TEU-101BK with reverse, TAMM3194
          Shocks: Four oil-filled plastic bodied with 5mm ball connectors
          Gearboxes: Front and rear sealed, ball bearing equipped
          Differentials: Planetary metal gears
          Transmission: Single-speed
          Body: Polycarbonate buggy style, painted and trimmed with decals
            applied
          Tires: Spike, 3.4" (86mm) outer diameter, 2.2" (56mm) inner diameter
            Rear Width, 1.5" (38mm), Front Width, 1.2" (30mm)
          Wheels: One piece, yellow in color  2.1" (54mm) diameter
            Rear Width, 1.1" (29mm), Front Width, 0.94" (24mm)
          Bumpers: Plastic, front and rear
          Suspension: Front and rear double wishbone four wheel independent
          Camber: Non adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Caster: Non adjustable steering tie rods, caster/toe-in refers to the
            angle of the front suspension when viewed from the side of the car
            in relation to the chassis
          Steering: Bell-crank type with servo saver

INCLUDES: Tamiya 1/10 scale RTR Plasma Edge Buggy with oil-filled shocks, 540
            motor, clear buggy body, tires, wheels, 19 tooth pinion gear,
            decal sheet, ESC, 70 tooth spur gear, radio and instructions
                                                                              _
REQUIRES: Radio: 2-Channel with 1 standard size steering servo
          Radio Batteries: (8) AA size
          Battery: 6-cell stick with Tamiya type connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:    Length:     15.7" (400mm)
          Width:       9.8" (249mm)
          Height:      6.7" (170mm)
          Weight:   2.6 lbs (1195g) approx.
            BODY-
          Length:    11.75" (298mm)
          Width:       5.7" (146mm) ahead of rear wheels (widest point)
                       2"    (51mm) at front wheels (thinnest point)
          Height:      3.5"  (89mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.   Bearing Set
             2   5x11mm     Rear Diff               1      DTXC1547
             1   8x12mm     Front Diff              1      DTXC1581
             2   8x12mm     Rear Diff               1      DTXC1581
             2   5x11mm     Drive Shaft             1      DTXC1547
             2   5x11mm     Front Axles             1      DTXC1547
             2   5x11mm     Rear Axles              1      DTXC1547

          It is not possible to request a specific radio channel when ordering
            as they are supplied by the manufacturer at random.

          The Plasma Edge is also available in kit form, TAMC0914.

                                                                    jxs 2/10/08
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators