This is the 1/10 scale electric powered, radio controlled,
Tamiya Raybrig NSX 07 On Road Car Kit.
FEATURES: Chassis: TA05-IFS composite bathtub style .08" (2mm) thick,
single deck frame
Drive: Four wheel two belt drive, tension adjustable
Motor: 540 motor with pre-attached leads
Ball Bearings: Full set included
Shocks: Four oil filled CVA plastic body horizontally mounted
Gearboxes: Enclosed, front and rear
Differentials: Ball type
Transmission: Single speed
Tires: Slick racing tire with foam inserts, 0.92" (24mm) wide, 2.5"
(64mm) outer diameter
Wheels: One-piece 6-spoke gray in color, 0.79" (20mm) wide, 1.9"
(48mm) diameter with +2° offset
Body: Lightweight polycarbonate Raybrig Honda NSX with 2007 Team
Kunimitsu decals and white rear spoiler
Bumpers: Foam front bumper
Suspension: IFS (Inboard Front Suspension) with horizontally
mounted shocks with push rod and rocker arm, front and rear
lightweight reversible arms for fine tuning, double wishbone rear
suspension
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
INCLUDES: Tamiya Raybrig NSX 07 On Road Car Kit, 540 motor, Honda NSX
clear body with rear wing and side mirrors, tires with foam
inserts, wheels, 22 tooth pinion gear, 70 tooth spur gear, decal
sheet and instructions
REQUIRES: Radio: 2-channel with 1 standard servo and electronic speed control
Radio Batteries: 8 AA size
Battery: 6 flat pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery
Paint: Spray or brush-on for Lexan body
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 14.6" (372mm)
Width: 7.4" (189mm)
Wheelbase: 10" (257mm)
Tread: 6.5" (165mm) distance between wheel centers side to side
Gear Ratio: 7.16:1
BODY-
Length: 16.8" (428mm)
Width: 7.5" (190mm)
Height: 3.5" (89mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Bearing Set
2 10 x 15mm Front Ball Diff (use 1 DTXC1595)
2 10 x 15mm Rear Ball Diff (use 1 DTXC1595)
2 4 x 8mm Center Pulley (use 1 DTXC1511)
2 5 x 11mm Front Axles (use 1 DTXC1547)
2 5 x 11mm Rear Axles (use 1 DTXC1547)
4 5 x 8mm Steering Arms (use 2 DTXC1523)
jxs 1/28/08
ir/jxs
Click here for Units of Measure Conversion Calculators
|