This is the radio controlled, glow powered, almost-ready-to-fly
Yak 54 .46 scale aerobatic airplane kit.
Recommended for Intermediate Pilots.
FEATURES: Construction: Built-up balsa and plywood
Covering: Pre-applied Oracover, color scheme is white and red with
orange yellow, blue and gold accents
Wings: Two-piece wood with aluminum joiner tube
Radio Compartment: Plywood reinforced
Cowling: Painted fiberglass
Canopy: Clear with red frame lines
Wheel Pants: Painted fiberglass
Cockpit features: Detailed and painted pilot figure and instrument
panel decal
Landing gear: Pre-bent 0.14" (3.5mm) aluminum with 2-1/2" (63mm)
treaded rubber main wheels and one 1" (25mm) rubber tail wheel with
pre-bent 0.078" (2mm) thick wire
Spinner: 2.25" (57mm) red plastic
Fuel Tank: 16oz (480cc) approximate
Control: Dual servo
Hardware: Hinges, wing bolts and all other required fasteners
included
Motor Mount: Nylon
INCLUDES: Prebuilt and pre-covered wings and tail section, aluminum
main landing gear, tailwheel wire, nylon adjustable engine mount,
main and tail wheels, pre-bent pushrods, hardware package,
fiberglass cowling and wheel pants, clear canopy, pilot figure,
decals, photo-illustrated instructions,
REQUIRES: Engine: .40 - .46 cu in (6.5 - 7.5cc) 2-stroke
OR .52 cu in (8.5cc) 4-stroke
Muffler: Standard type included with engine
Radio: Four channel
: Five, 42 oz/in torque minimum
(2-, 1-, 1-, 1-throttle)
Servo Extension: One 6" (152mm) for
: One for
Misc. Items: Foam rubber padding, medium fuel tubing, fuel filter,
propeller, building and field equipment
SPECS: Wingspan: 56.1" (1425mm)
Flying Weight: 5.5 - 5.9lbs (2500 - 2700g)
Specs such as Wing Area and are not provided by the
manufacturer
Length: 51.97" (1320mm)
Airfoil: Fully-symmetrical, mid wing mount
: 4.1" (105mm) Back from the wing's
at the sides.
Control Throws- Low Rate High Rate
: Up & Down 0.31" (8mm) 0.47" (12mm)
: Up & Down 0.31" (8mm) 0.47" (12mm)
: Right & Left 1.1" (28mm) 1.6" (40mm)
COMMENTS: If a replacement fuel tank is needed, order the Sullivan 16oz flex
tank (SULQ1743), or the DuBro 16oz tank (DUBQ0216).
Some minor trimming and modifications may be required.
jxs 4/23/08
ir/jxs
updated 5/1/08 rda
updt jxs 11/19/09
– If you need more information, use these Phoenix Models resources – |
E-mail: airsupport@greatplanes.com
| |
Postal Address:
Phoenix Models
1608 INTERSTATE DRIVE
CHAMPAIGN, IL 61822
|
|
Click here for Units of Measure Conversion Calculators
|