View Larger Picture

Instruction Manuals:	Manual 1 (13 MB)
Tower Catalog Page:	103
E-mail This Page To A Friend

    This is the 1/12 scale, electric powered, radio controlled, assembled,
               HPI Wheely King Four Wheel Drive Monster Truck.
           This version requires radio system, battery and charger.

FEATURES: Chassis: TVP (Twin Vertical Plate) plastic tube frame design with
            rear wheelie bar
          Drive: Four wheel shaft drive
          Motor: 540 size 27 turn
          Ball Bearings: Full set included
          Shocks: Four plastic bodied
          Transmission: Single speed
          Suspension: Front and rear solid axles with pivot arms, 6" (152mm) of
            suspension travel for all-terrain driving
          Wheels: Chrome 2" (51mm) diameter, 2.2" (56mm) wide
          Tires: 5.3" (135mm) diameter, 2.75" (70mm) wide Mud Thrasher
          Body: Prepainted and trimmed with decals
          Caster: Non-adjustable
          Camber: Non-adjustable
          Warranty: Two year

INCLUDES: HPI Wheely King 4WD Monster Truck with motor, painted body,
            27T motor, 90T spur gear, 21T pinion gear, instructions

REQUIRES: AA Batteries: 8 for transmitter
          Radio: 2-channel with standard size steering servo
          Battery: 7.2V, 1500mAh NiCd 6-cell stick pack with standard connector
          Battery Charger: Timed or peak for 6-cell pack
          Electronic Speed Control: For stock 27 turn motor

SPECS:      VEHICLE-
          Length: 17"   (432mm)
          Width:  11.7" (297mm)
          Height: 10"   (254mm)
          Weight:  4.4lb  (2015g)
          Wheelbase: 9.4" (239mm)
          Front and Rear Tread: 9.1" (231mm) side-to-side at wheel centers
          Front and Rear Track: 11.5" (292mm) side to side at outer edges of
            wheel
          Ground Clearance: 2.2" (55mm) at lowest point
          Suspension Travel: 6" (152mm)
            BODY-
          Length: 15.3" (390mm)
          Width:   5.9" (150mm) ahead of front wheels narrowest point
          Width:   6.5" (165mm)
          Height:  4.3" (109mm)_

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                 Qty.  Bearing Set
             4   5x11mm    Front Wheels               2    DTXC1547
             4   5x11mm    Rear Wheels                2    DTXC1547
             4   5x11mm    Gearbox                    2    DTXC1547
             2   10x15mm   Gearbox                    1    DTXC1595

          HPI makes a Crawler Conversion set which contains everything needed
            to convert the Wheely King to an all-out rock crawler, HPIC6732.

                                                                   jxs 11/27/07
                                                                  kpm01/02/2008
                                                                         ir/jxs



– If you need more information, use these HPI Racing resources –

E-mail: support@hpiracing.com
Web Site: http://www.hpiracing.com/
Phone: 949-753-1099


 
Postal Address:
HPI Racing
70 ICON STREET
FOOTHILL RANCH, CA 92610  








Click here for Units of Measure Conversion Calculators