View Larger Picture

E-mail This Page To A Friend

        Covert your older short chassis version CRT.5 Truggy to the new
       Long Chassis version with this Long Chassis Conversion from OFNA.

FEATURES: Chassis features .12" (3mm) thick aluminum construction
          2.5mm thick aluminum upper chassis allows the use of standard size
           servos (steering and throttle/brake)
          Longer chassis improves the model's handling characteristics

INCLUDES: One Long Chassis
          One Aluminum Radio Tray (black in color)
          One Brake Disk
          One 60mm Long Center Drive Shaft
          One 3x26mm Turnbuckle
          Two 4mm Plastic Ball Ends
          Two 2x60mm Brake Rods
          One Nylon Parts Tree with Radio Tray and Body Posts
          Twenty-Six 3x10mm Flat Head Screws (2mm hex size)
          Two 3x18mm Button Head Screws (2mm hex size)
          Nine 3x8mm Button Head Screws (2mm hex size)
          One 3x15mm Button Head Screw (2mm hex size)
          Nine 3x10mm Button Head Screws (2mm hex size)
          One 3x3mm Flat Head Screw (2mm hex size)
          Eight 3x8mm Washers
          One Instruction Sheet

REQUIRES: Assembly following the included instructions

SPECS:    Length: 12" (305mm)
          Width: 5.13" (130mm)
          Thickness: .12" (3mm)

COMMENTS: In looking over the instruction sheet, it appears that some of the
           screws included in the screw bag will not be used during assembly.

                                                                  kpm01/29/2008
                                                                         ir/jxs



– If you need more information, use these Ofna resources –

E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910


 
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators