This a 1/18 scale Red, Lighted Gasoline Pump for the Custom Case, Display Case.
This is part of Hobbico's Model Maker Series.
FEATURES: Functioning 3V clear bulb is pre-wired with a White 2-pin connector.
This static display '50s-style gasoline pump is constructed of
plastic. The face of the pump is the same on both sides.
Comes completely assembled and pre-finished in red with white face.
The White face has Black with White number display of 19.9 cents
per gallon. The face is outlined in chrome, as are the base,
crank handle, and nozzle. The nozzle is connected to the gas pump
by a Black rubber-like hose. Other signs on the pump are:
PREMIUM, CONTAINS LEAD and GAS.
For use with the 1/18 scale Custom Case.
Requires the Power Module (not included) that uses two AAA size
batteries and has an ON/OFF switch.
INCLUDES: One 1:18 scale Red, Lighted Gasoline Pump
REQUIRES: Power Module
(2) AAA size batteries for the Power Module
Plug accessories into the module and attach it to the bottom of case.
Hobby knife to cut a hole into the base insert to mount the pump.
SPECS: Height: 3" (76mm)(from the floor of the display base to the top
of the gasoline pump)
Width: 1-3/8" (35mm)
Thickness: 1" (25mm)
Outer Diameter of the Round Mount: 3/8" (10mm)
Overall Height: 3-3/8" (86mm)(with round mounting base)
Wire Length: 12" (304mm)
COMMENTS: The White 2-pin connector is not available separately.
For the 1:24 scale Red Lighted Gasoline Pump, use HCAS9525.
This static pump could be used in non-Custom Cases w/modifications.
All of the new product should have a Blue "dot"
Click here for Units of Measure Conversion Calculators
|