This is the Mongoose Micro Programmable Brushless/Brush
Speed Control from Novak.
Designed for Brushed Motors 380 size or smaller or
or use with any Novak Three-80 Micro Pro.
FEATURES: Three brushless profiles specifically designed for micro
vehicle applications and one brushed profile
Built-in auto detect brush mode
Built in smart-stop 2S and 3S Li-Po cut-off circuitry
Gold-plated PCB direct-solder wiring tabs
One touch set-up with four different color status LEDs
Lightweight replaceable 16GA Silicone Battery and Motor Wire
Water-resistant case
Thermal overload protection
Fully programmable
Auto-detect brush mode
120 day limited warranty
INCLUDES: One Mongoose Micro Programmable Brushless/Brush Speed Control
Factory installed heat sink and 16G power wires (2mm connectors)
User replaceable input harness
Operating instructions
Double sided tape
REQUIRES: Installation
SPECS: Dimensions: 1.15" x 0.95" (29mm x 24mm)
Weight: 0.77oz (21.7g)
Input Voltage: 2S or 3S Li-Po; 4-9 cells (1.2v/cell)
Battery Eliminator Circuitry: 6.0V/2.0A
On-Resistance: 0.0038ohms (per phase for brushless)
Rated Current: 40A (per phase for brushless)
cnh 7/15/08
ir/jxs
– If you need more information, use these Novak resources – |
E-mail: cs@teamnovak.com
Phone: 949-833-8873
|
|
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614
|
Click here for Units of Measure Conversion Calculators