View Larger Picture

E-mail This Page To A Friend

    This is the 1/16 scale electric powered, radio controlled, ready to run
                      Cen Racing ME-16 MT Monster Truck.

FEATURES: Chassis: H.I.C. high impact composite
          Drive: Four wheel shaft
          Radio: Cen Skyion DSX 27MHz AM radio system with one standard size
            servo, ten model memory, sealed receiver and battery box,
            transmitter has charge jack
          Motor: 540 size
          Pinion Gear: 21 tooth
          Transmission: Internal diff output shaft-no output cups to wear out
          Slipper Clutch: Fully adjustable, allows adjustment of power transfer
            from motor to wheels
          Ball Bearings: Full set included
          Shocks: Big Bore oil filled composite bodied
          Tires: 2.05" (52mm) wide, 3.94" (100mm) diameter with foam inserts
          Wheels: Plastic, 1.9" (47mm) wide 2.2" (58mm) diameter, white in
            color
            **many aftermarket 1/10 scale tires and wheels will also fit**
          Body: Trimmed and painted monster truck
          Bumper: Front, high impact plastic construction
          Suspension: Independent, adjustable
          Caster: Adjustable, caster/toe-in refers to the angle of the
            front suspension when viewed from the side of the car in relation
            to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of
            the tires from vertical when viewed from front or behind vehicle
          Steering: Bell crank type with servo saver
          Battery: 7.2V 1800mAh stick pack with Tamiya type connector
          Battery Charger: 120V wall type with Kyosho type connector

INCLUDES: Electric powered RTR Cen Racing MT-16 Monster Truck with 540 motor,
            foam inserts, wheels, Skyion DSX 2 channel radio with one
            standard servo, ESC, charger, battery, painted body, and manual

REQUIRES: AA Batteries: 8 for radio system

SPECS:      Vehicle-
          Length:              11.25" (286mm)
          Width:               10.47" (266mm)
          Height:               6"    (152mm)
          Wheelbase:            7.48" (190mm)
          Ground Clearance:     1.26"  (32mm)
          Front and Rear Tread: 8.6"  (219mm) center of tires
          Front and Rear Track: 10.6" (270mm) outer edges of tires
          Gear Ratio:            1:14.683
          Ground Clearance:     0.47"  (12mm)

            Body-
          Length:              10.7"  (273mm)
          Width:                5.5"  (139mm)
          Height:               3.1"   (79mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.    Size     Location           Qty.  Bearing Set
             2   12x18x4mm   Rear Transmission   1     DTXC1597
             2   15x21x4mm   Rear Transmission       not carried
             3    5x11x4mm   Rear Transmission   2     DTXC1547
             4    5x11x4mm   Rear Hubs           2     DTXC1547
             2   15x21x4mm   Front Gearbox           not carried
             2   12x18x4mm   Front Gearbox       1     DTXC1597
             4    5x11x4mm   Front Hubs          2     DTXC1547

                                                                    jxs 2/18/08
                                                                         ir/jxs



– If you need more information, use these CEN Racing resources –

E-mail: customerservice@cenracing.com
Web Site: http://www.cenracing.com/
Phone: 714-792-1923


 
Postal Address:
CEN Racing
GENKA TRADING COMPANY
1800 E MIRALOMA AVE, STE F
PLACENTIA, CA 92870  








Click here for Units of Measure Conversion Calculators