View Larger Picture

Tower Catalog Page:	105
E-mail This Page To A Friend

          This is the electric powered, radio controlled, 1/10 scale
          Tamiya Toyota Land Cruiser Off Road Rock Crawler Truck Kit.

FEATURES: Chassis: CR-01 dedicated crawler chassis with heavy duty ladder frame
            pressed aluminum channels and resin cross members
          Drive: Four wheel shaft drive
          Motor: 540 size
          Ball Bearings: Full set included
          Shocks: Oil-filled, compressed via pushrods and rocker arms
          Gearbox: Planetary type with 20 tooth pinion gear for a 40.5:1 gear
            ratio, separately available 16 - 25 tooth pinion gears for gear
            ratios ranging from 50.6:1 - 32.4:1
          Transmission: Single speed
          Tires: Rock crawler type 4.9" (125mm) diameter, 2.2" (56mm) wide
            with foam inserts
          Wheels: Plastic 3-piece beadlock  2.8" (71mm) diameter, 1.4" (35.8mm)
            wide, black in color
          Body: Lightweight clear polycarbonate
          Bumper: High impact front plastic
          Suspension: Four link coil spring front and rear
          Differential: Planetary gear
          Steering: Adjustable, direct link with servo saver

INCLUDES: Tamiya Toyota Land Cruiser Rock Crawler chassis with 20 tooth pinion
            gear, oil-filled shocks, 540 motor, 3-piece beadlock wheels,
            body, tires, decal sheet, spur gear, instructions

REQUIRES: Radio: 2-Channel with 1 Servo
          Electronic Speed Control:
          Radio Batteries: (8) AA size
          Battery: 6-cell stick pack w/standard Tamiya connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Paint, building and track equipment

SPECS:      VEHICLE-
          Length:     17"    (435mm)
          Width:      10.43" (265mm)
          Height:     10.47" (266mm)
          Weight:      5.66lbs (2567g) approx.
          Wheelbase:  11.34" (288mm)
          Gear Ratio: 40.5:1 with supplied 20T pinion gear
            BODY-
          Length:     15"    (381mm)
          Width:       7.25" (184mm) at rear wheels (widest point)
          Height:      6"    (152mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.   Bearing Set
             4   8x12mm    Link Mounts              2      DTXC1581
             2   5x10mm   Drive Shaft A             1      DTXC1535
             2   5x10mm   Drive Shaft B             1      DTXC1535
             4   5x10mm   Front Uprights            2      DTXC1535
             4   5x10mm   Rear Uprights             2      DTXC1535
             6   5x8mm    Planetary Gears           3      DTXC1523
             1   10x15mm  Planetary Gears           1      DTXC1595
          To paint body to match color scheme on box, order the following
            Tamiya colors;
            PS-1 White  TAMR8601           PS-34 Bright Red TAMR8634
            PS-31 Smoke TAMR8631           PS-5 Black       TAMR8605

                                                                    jxs 2/18/08
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators