View Larger Picture

Tower Catalog Page:	203
E-mail This Page To A Friend

    This is the Fox .35 cu in (5.7cc) Control Line Ceramic Cylinder Engine.

FEATURES: Ceramic plated aluminum cylinder adds up to 20% more RPM,
            substantially reduces wear on piston and sleeve and reduces
            cylinder weight by 35%
          Suited for control line stunt models up to 44 oz (1247g) in weight
            and wing spans from 36" - 52" (914mm - 1321mm) and also profile
            models such as the Ringmaster and Flight-Streak type
          Single needle control line carburetor

INCLUDES: Fox .35 cu in (5.7cc) Control Line Ceramic Cylinder Engine with glow
            plug, muffler with pressure tap

REQUIRES: Fuel: Control line formula, 29% castor oil, 5% nitromethane and 66%
            methanol (manufacturer recommends Fox Superfuel, not carried-engine
            will not run properly and usable life may be reduced by using most
            commercial R/C fuels on the market)
          Glow starter, plug wrench and field equipment

SPECS:    Displacement: .35 cu in (5.7cc)
          Bore: .800
          Stroke: .700
          RPM: 9600 with 10x6 propeller
          Weight: 7.9oz (225g) with muffler
          Needle Setting: 5-7 turns out with hole in spraybar pointing down
          Distance Between Mounting Hole Centers Same Side: 0.63" (16mm)
          Distance Between Mounting Holes Centers Opposite Side: 1.5" (37.5mm)
          Height Bottom of Mounting Tab/top of Cylinder Head: 2.4" (62mm)
          Height from Crankcase Bottom to top of Cylinder Head: 3" (76.5mm)
          Width at Mounting Tabs: 1.8" (46mm)
          Distance from Backplate to Front Bearing: 2" (51mm)
          Distance from Backplate to end of Crankshaft: 3.1" (79mm)
          Distance Between Muffler Mounting Holes: 1.4" (35mm)

                                                                    jxs 7/11/08
                                                                         ir/jxs



– If you need more information, use these Fox resources –

E-mail: info@foxmanufacturing.com
Web Site: http://www.foxmanufacturing.com/
Phone: 479-646-1656


 
Postal Address:
Fox
5305 TOWSON AVENUE
FORT SMITH, AR 72901  








Click here for Units of Measure Conversion Calculators