View Larger Picture

Tower Catalog Page:	106
E-mail This Page To A Friend

          This is the 1/10 scale electric powered, radio controlled,
                    Tamiya DB01 Baldre Off Road Buggy Kit.

FEATURES: Chassis: DB01 plastic chassis with integrated bulkheads for
            simplified maintenance, chassis also locates heavy components near
            the center for optimum weight distribution
          Drive: Four wheel two belt drive, tension adjustable enclosed with
            ABS resin covers to protect from dirt
          Motor: 540 motor with pre-attached leads
          Ball Bearings: Full set included
          Shocks: Four oil filled CVA plastic body
          Gearboxes: Enclosed, front and rear
          Differentials: Ball type
          Transmission: Single speed
          Tires:
            Rear:  1.6" (41mm) wide, 3.3" (83mm) outer diameter
            Front: 1.2" (32mm) wide, 3.3" (83mm) outer diameter
            Inner Diameter 2.2" (56mm)
          Wheels: One-piece dish type
          Body: Lightweight polycarbonate Baldre buggy with rear wing
          Suspension: Four wheel independent double wishbone with same
            configuration as the Tamiya TRF501X chassis
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Bell-crank with servo saver

INCLUDES: DB01 rolling chassis with oil filled shocks, 540 motor, Baldre clear
            buggy body, spike tires, foam inserts, dish wheels, CVA oil-filled
            shocks, 17 tooth pinion gear, 91 tooth spur gear, rear wing,
            decal sheet and instructions
                                                                              _
REQUIRES: Radio: 2-channel with 1 standard servo and Electronic Speed Control
          Radio Batteries: 8 AA size
          Battery: 6 flat pack with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Paint: Spray or brush-on for polycarbonate body
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:       15.5" (395mm)
          Width:         9.8" (248mm)
          Height:        6.2" (157mm)
          Weight:     2.4lbs  (1075g)
            BODY-
          Length:       11.25" (287mm)
          Width:         6.12" (150mm)
          Height:        3.0"  (72mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                Qty  Bearing Set
             2   10 x 15mm  Front Ball Diff           2  DTXC1595
             2   10 x 15mm  Rear Ball Diff            1  DTXC1595
             2     5 x 8mm  Front Ball Diff           2  DTXC1523
             2     5 x 8mm  Rear Ball Diff            2  DTXC1523
             2     4 x 8mm  Center Pulley             1  DTXC1511
             2    5 x 10mm  Front Axles               1  DTXC1535
             2    5 x 10mm  Rear Axles                1  DTXC1535
             4     5 x 8mm  Steering Arms             2  DTXC1523

                                                                    jxs 4/11/08
                                                                     jml 6/5/08
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators