This is the Radio Controlled, Glow, Gasoline, or Electric Powered
Almost-Ready-to-Fly Great Planes Performance Series Reactor 1.60 Scale Airplane
IMAA Legal, this model is ideal for a flyer's first
giant scale aerobatic and 3D airplane.
FEATURES: Construction: Laser cut balsa and plywood with a foam sheeted turtle
deck
Wings: Two-piece, bolt-on with aluminum joiner tube
Covering: TopFlite MonoKote
Landing Gear: Pre bent aluminum 0.16" (4mm) thick
Wheels: Main, 3.5" (88mm) diameter foam, tailwheel, 1" (25.4mm)
rubber
Radio Compartment: Hatch removes easily with four bolts
Spinner: Aluminum 3.25" (82.5mm) diameter
Cowling: Painted fiberglass
Wheel Pants: Painted fiberglass
Canopy: Clear molded plastic
Control: Dual servo
Control: Dual servo
Fuel Tank: Approximately 24oz (720cc) for glow fuel, must purchase
gasoline conversion kit and tubing if using gasoline engine
Engine Mount: Two piece composite construction
Hardware: Full set provided, IMAA legal
Assembly Time: Only 15-20 hours
Warranty Period: Great Planes guarantees this kit free from defects
in both material and workmanship at the date of purchase.
INCLUDES: Pre-built and covered wings, and tail assemblies, pushrods,
landing gear, wheels, wheel pants, cowl, fuel tank, wood servo
trays, aluminum spinner two decal sheets, hardware package, photo-
illustrated instructions
REQUIRES: Engine: 1.60 - 2.10 cu in (26 - 34cc) two-stroke OR
2.00 - 2.20 cu in (33 - 36cc) four-stroke OR
2.5 - 3.0 cu in (43 - 50cc) gasoline (Desert Aircraft DA-50 gas
engine recommended, not carried) OR
80-75-230 Outrunner Brushless Motor
Radio: 5-6 channel, 6-channel computer radio recommended
: Eight, 7 high-torque, 1 standard ball bearing
6" (152mm) Heavy Duty Servo Extensions: Two/inboard control
24" (610mm) Heavy Duty Servo Extensions: Two/outboard control
36" (914mm) Heavy Duty Servo Extensions: Three for tail
1.5" (38mm) Large Scale Single Side Servo Arms: Seven
: Two heavy duty
Receiver Battery: 4.8 or 6V at least 4200mAh
Heavy duty switch harness and charge jack
#4 Plastic Washers: For cowl
Misc. Items: Building and field equipment
SPECS: Wingspan: 84.5" (2140mm)
Wing Area: 1556 sq in (100.4 sq dm)
Weight: 14 - 17 lb (6.35 -7.71 kg) depending on power setup
selected
Length: 85" (2160mm)
Airfoil: Fully symmetrical
: 7" (178mm) from the of the root wing
rib
Control Throws: Low High 3D
: 1" (25mm) 10° 1-1/2" (38mm) 15° 3-1/4" (83mm) 34°
: 2-3/4" (70mm) 16° 4-3/4" (121mm) 28° 5-3/4" (146mm) 35°
: 1-1/2" (38mm) 11° 2-1/2" (64mm) 19° 4-1/2" (114mm) 36°
COMMENTS: The 38% Extra 330S Pilot Bust (GPMA3207) also fits nicely under the
canopy of this aircraft.
Following is a list of MonoKote colors used to cover this model and
order numbers for 6ft rolls;
White TOPQ0204 Sapphire Blue TOPQ0226
Orange TOPQ0202 Missile Red TOPQ0201
If a replacement fuel tank is needed, order the Sullivan 24oz
tank (SULQ1444), or the DuBro 24oz tank (DUBQ0224). They are 1oz
smaller than the original tank.
Some minor trimming and modifications may be required.
jxs 5/16/08
ir/jxs
Click here for Units of Measure Conversion Calculators
|