View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

                This is the radio controlled, electric powered,
                    Multiplex EasyCub Trainer Airplane Kit.
                          For Beginner Modeler/Fliers.

FEATURES: Construction: Elapor foam white in color
          Wings: Two-piece all foam
          Radio Compartment: Accessible under wing
          Landing Gear: Main, prebent fixed wire 0.087" (2.2mm) diameter,
            tailgear, prebent 0.039" (1mm) diameter wire
          Wheels: Main, two foam 2" (51mm), foam 1" (25.4mm) tailwheel
          Canopy: Elapor foam
          Decals: Peel and stick application with yellow and blue accents and
            black window detail
          Building Time: Ready to fly in several hours

INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
            hardware, pre-bent 0.039" (1mm) wire landing gear, two 2" (51mm)
            main wheels, 1" (25.4mm) tailwheel, plastic motor mount, two
            fiberglass wing spars, decal sheet and photo-illustrated
            instructions

REQUIRES: Multiplex Power Pack, MPUG3224 this includes outrunner electric
            motor, electronic speed control, propeller and prop adapter
          Battery: 2100-2500mAh LiPo
          Battery Connector Set: WSDM3001
          Battery Charger: LiPo compatible with balancer
          Radio: 3 channel
          Servos: Two mini size, 1-Elevator, 1-Rudder
          Misc. Items: Building and field equipment

SPECS:    Wingspan: 55" (1397mm)
          Wing Area: 565 sq in (36.5 sq dm)
          Weight: 850.49g (30oz)
          Wing Loading: 7.53 oz/sq ft) (23 g/sq dm)
          Length: 38" (965mm)
          Airfoil: Flat bottom high-wing placement
          Center of Gravity: 3.1" (80mm) Back from the wing's leading edge
            at the fuselage
          Control Throws-
            Elevator: Up 0.59" (15mm), Down 0.47" (12mm)
            Rudder: Right to Left 0.59" (15mm)

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                    jxs 8/20/08
                                                                         ir/jxs



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators