View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

     This is the radio controlled, electric powered, almost ready to fly
                        Multiplex Blizzard Airplane.
                   For modelers 14 years of age and older.

FEATURES: Construction: Elapor foam, white in color, foam fuselage includes
            fiberglass longerons
          Wings: Two-piece with two carbon fiber reinforced plastic spars and
            four supplementary spar caps
          Radio Compartment: Accessible under canopy
          Aileron Control: Dual servo
          Decals: Peel and stick application with red and blue accents and
            black window detail
          Spinner: Plastic, blue in color 1.5" (38mm) diameter
          Building Time: Ready to fly in several hours

INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
            hardware, plastic motor mount, four carbon fiber wing spars, decal
            sheet, spinner and photo-illustrated instructions

REQUIRES: Multiplex Power Pack, M993233, MPUG9333
          Battery: 2100-2500mAh LiPo MPUP5731 or MPUP5791
          Battery Connector Set: WSDM3001
          Battery Charger: LiPo compatible with balancer
          Radio: 3 channel
          Servos: Three mini size, 2-Aileron, 1-Elevator (fourth servo required
            for optional supplementary rudder function) MPUM9233
          Multiplex High Current Plug (MPUC8513) and High Current Socket
            (MPUC8514)
          Misc. Items: Building and field equipment

SPECS:    Wingspan: 54.3" (1380mm)
          Weight: 850.49g (30oz)
          Wing Loading: (19.4sq dm)
          Length: 35.8" (910mm)
          Airfoil: Flat bottom
          Center of Gravity: approximately 1.9 - 2.4"  (50 - 60mm) aft of the
            wing root leading edge
          Longitudinal Dihedral: 1°
          Motor Downthrust: 6°
          Motor Sidethrust: 0°
          Control Throws-
            Ailerons: 14/6mm +/-          Flaps: 2mm down
            Elevator: 5/5mm +/-           Spoilers: 0.5mm down
            Rudder:   7/5mm +/-           Snap-Flap: 2mm up
          Elevator Compensation:
            Spoilers: 0.5mm down
            Flap: max. 1mm up
            Power: 0.5mm down
          Expo Elevator: 30%

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                   jxs 12/05/08
                                                                         ir/jxs



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators