View Larger Picture

Parts Express Eligible:	Yes
Tower Catalog Page:	183
E-mail This Page To A Friend

       This is the Futaba S9150 Digital Aileron Servo with J Connector.
             Designed for aileron applications on model aircraft.

        This servo can produce high-current draw from your batteries.
        If using NiMH or LiPo batteries, make sure they are capable
                       of delivering sufficient amps.

FEATURES: Coreless motor
          2 ball bearings
          Digitally enhanced microprocessors cut in half the response time
            from transmitter input to servo reaction
          Dust and water resistant-not water proof
          Low profile aero design is especially suited for wing installations
          Black plastic case
          Nylon gears
          One year warranty

INCLUDES: One S9150 Digital aileron servo 1¾" (44mm) diameter servo wheel,
            1¼" (32mm) diameter servo wheel, one six point servo wheel,
            four brass grommets, four mounting screws and two rubber mounts.

SPECS:    Speed:        0.18 sec/60° @ 4.8V
          Torque:       81 oz-in (5.8 kg-cm) @ 4.8V
          Dimensions:  1.9 x 1.1 x 1.0" (48 x 27 x 25mm)
          Weight:     1.9oz  (53g)
          Output Shaft Diameter: 8mm
          Power Supply: 4.8V (Futaba does NOT recommend using 6V)

COMMENTS: S9150 Digital Servo Precautions,
           -It is best to avoid long leads and Y-harnesses especially with
            standard grade wires. If problems are encountered, consider using
            heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's
            Pro Series,minimizing lead lengths, and/or removing Y-harnesses.
           -Current Drain: This digital servo is specially designed for high-
            torque or high-speed, therefore very high current drain is normal
            at startup. For ultimate performance when using this servo please
            review the following points.
              1. Radio systems with the Battery Fail Safe function have a
                 higher cut-off voltage setting which will cause shorter
                 operation time.
              2. When installing the servo, please check pushrod linkage to
                 make sure there is no binding in order to prevent excessive
                 power consumption and decrease the life of the motor and
                 battery.

         This digital servo cannot be used with the following * AM *
               transmitters as the servo neutral signal is: 1310us).
        CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop,
              T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

      ****   Otherwise they will work fine with current AM systems  *****

          ** no other arms will work on this, has a unique spline size.
                                                                   JXS 10/25/00
                                                                          ir/jl
                                                          **updated JPG 3/18/03
                                                              updt jxs 10/30/03
                                                              updt jxs 11/01/04



– If you need more information, use these Futaba resources –

Click Here: Manufacturer's Product Web Page
E-mail: support@futaba-rc.com
Web Site: http://www.futaba-rc.com/
Phone: 217-398-8970


 
Postal Address:
Futaba
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators