This is the Novak HV Pro High Voltage Brushless 4.5 Motor System with 5mm Shaft
    Ideal upgrade system for the Traxxas E-Maxx and E-Revo, HPI E-Savage
                  and the Kyosho Twin Force monster trucks.

FEATURES: High voltage speed control and sensored Brushless motor efficiently
            replaces the stock two brush motor system resulting in
            significantly higher speeds and longer run times
          Less maintenance than Brushed motors-no brushes, springs or
             commutator to wear out
          120 day limited warranty

          Motor Features:
            Easily fits in Traxxas E-Maxx and E-Revo, Kyosho Twin Force and HPI
              E-Savage
            One HV4.5 brushless motor replaces two 550 brushed motors
            Direct solder wiring tabs
            Nickel plated sintered rotor and aluminum ribbed end bells
            Sensor based technology
            Locked rotor and thermal overload protection
            Completely enclosed
            Low cogging
            Maintenance free
            Excellent low-speed driveability
            Ball bearings (replaceable front end bell and bearing)
            Factory installed heat sink

          Electronic Speed Control Features:
            Three throttle programs with one-touch set up FWD/BRK/REV,
              FWD/BRK, FWD/BRK/25%REV
            Dual battery inputs with factory installed connectors
            Locked rotor detection, digital anti-glitch and thermal
              overload protection
            User-replaceable input harness
            No external receiver pack required BEC handles high-power servo
            Gold plated PCB direct solder wiring tabs
            Reverse Disable (program 2)
            25% Reverse and Brakes (program 3)
            Digital microprocessor controlled, specially designed for Brushless
              motor control
            Radio-Priority and Polar-Drive circuitry

INCLUDES: One HV4.5 Brushless motor, high-voltage Electronic Speed Control
            dust cover, cooling fan mounting bracket and instructions

REQUIRES: Installing in vehicle and connecting to batteries and receiver

SPECS:    HV4.5 Brushless Motor Specs:
            Length: 2.84" (72.1mm)
            Diameter: 1.41" (35.8mm)
            Weight: Motor: 8.36oz (295g) Heat Sink: 1.97oz (69.5g)
            Shaft Diameter: 5mm (compatible with Novak Mod 1 (5100-5110)
              and 32p (5152-5157) pinion gears with 5mm bore
            kV (unloaded): 4,800 RPM/volt
            Watts: 750
            Input Voltage: up to 14 cells (1.2V/cell)
            Commutation: Sensor based Electronic
            Magnet: Nickel-plated sintered high-strength neodymium
            Performance: Approx. 20% longer run-times (capable of between
              40-45 MPH in a basic E-Maxx setup with improved drivetrain parts)

          Pro High Voltage Brushless Speed Control:
            Input Voltage: 6-14 cells (1.2V DC/cell) or 2S-4S LiPO cells
              Forward/Braking/Reverse
            Case Size: 1.75" x 2.17" x 0.85" (44mm x 55mm x 21mm)
            Weight: 4.8oz (135g)
            Throttle Programs: Three
            BEC (Battery Eliminator Circuitry): 6V/3A
            Watts: 375
            On-Resistance: 0.0013 x 2 Ohms
            Rated Current: 400A/phase @ 25°C MOSFET temp.
            Braking Current: 400A/phase @ 25°C MOSFET temp.
            Max Discrete Steps: 256
            Motor/Battery Wires: 14AWG silicone

COMMENTS: #3524 HV 4.5 Brushless Motor available separately, NOVC3524

                                                                   jxs 10/16/06
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators