View Larger Picture

Parts Express Eligible:	Yes
E-mail This Page To A Friend

                          This is the Brake Kit for the
              Venom 1/8 GPV-1 3-Channel RTR Motorcycle, VNRC01**.

FEATURES: Nylon construction
          Black in color

INCLUDES: Two M2 Lock Nuts
          Six M1.6x6mm SH Cap Head Screws
          Two Brake Cams
          Four M1.6x10mm SH Cap Head Screws
          Two M3x3mm Set Screws
          Two Rotor Hubs
          Four Brake Pad Spacers
          Four M1.6x.5 Washers
          One Brake Cable Bracket
          Two Brake Cable Tesioner
          Five M2x6mm SH Cap Screws
          One Left Caliper
          Two Brake Rotors
          One 117mm Left Brake Cable
          One 77.5mm Left Brake Tube
          One 132mm Right Brake Cable
          One 92mm Right Brake Tube
          One Left Fork Lower Leg
          One Right Fork Lower Leg
          One Right Caliper
          One Brake Cable Clevis
          One Brake Servo Horn
          Four Brake Pads
          Four Brake Pad Fibers
          One Micro Servo

REQUIRES: Assembly and installation on the GPV-1
          No.1 Phillips Screw Driver (DTXR0122)
          1.5mm (DTXR0288), 2.0mm (DTXR0289), and 2.5mm (DTXR0290) Hex Drivers
          Mini Long Nose Pliers (DTXR0300)
          Double Sided Tape (GPMQ4440)
          CA Glue (GPMR6007)

                                                                     cnh 1/2/09
                                                                         ir/jxs



– If you need more information, use these Venom resources –

E-mail: customerservice@venom-group.com
Phone: 800-705-0620


 
Postal Address:
Venom
14028 N OHIO ST
RATHDRUM, ID 83858  








Click here for Units of Measure Conversion Calculators