View Larger Picture

Tower Catalog Page:	59
E-mail This Page To A Friend

    This is the radio controlled, electric powered, almost-ready-to-fly,
                       Multiplex Mentor Trainer Airplane.
    For Beginner to Intermediate Modeler/Fliers 14 Years of Age and Older.

FEATURES: Construction: Elapor foam white in color
          Wings: One-piece all foam
          Radio Compartment: Accessible under wing
          Landing Gear: Prebent aluminum 0.098" (2.5mm) thick
          Wheels: Two foam 2-3/4" (70mm) main wheels and one 1" (26mm) tail
            wheel
          Aileron Control: Dual servo
          Cowl: Elapor foam, one piece
          Spinner: Elapor foam, 2.5" (63mm)
          Motor Mount: Two-piece plastic
          Decals: Peel and stick application with red, gray and silver accents
            with black windows
          Building Time: Ready to fly in several hours

INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
            hardware, pre-bent 0.098" (2.5mm) landing gear, two 2-3/4" (70mm)
            main wheels, plastic two-piece motor mount, decal sheet and photo-
            illustrated instructions

REQUIRES: Speed Control: At least 45 amp and electric motor, Multiplex offers a
            Power Pack for the Mentor that includes their Himax 3528-1000
            brushless motor and BL-55 ESC, MPUG3228
          Propeller: 11x5.5E
          Battery: 11.1V LiPo, at least 3200mAh recommended
          Radio: 4 channel
          Servos: Four mini size, 2-Aileron, 1-Elevator, 1-Rudder
          Receiver Battery: 4.8V
          Misc. Items: Building and field equipment

SPECS:    Wingspan:     64.2" (1630mm)
          Wing Area:    697 sq in (45 sq dm)
          Weight with 3 LiPo Cells: 4.3lbs (1950g)
          Wing Loading: 14.58 oz/sq ft (44.5g/sq dm)
          Length:       46.1" (1170mm)
          Airfoil: Flat bottom high-wing placement
          Center of Gravity: 3.3" (85mm) Back from the wing's leading edge at
            at the fuselage
          Control Throws-
            Elevator: Up 0.59" (15mm), Down 0.47" (12mm)
            Rudder: Right to Left 0.59" (15mm)
            Ailerons: Up 0.59" (15mm)
                      Down 0.27" (7mm)

COMMENTS: This model is NOT made of styrofoam and it is not possible to glue
            the material using white or epoxy glue. Medium CA glue used with
            an activator is the only method of gluing recommended by the
            manufacturer.

                                                                    jxs 7/31/08
                                                                         ir/jxs



– If you need more information, use these Multiplex resources –

Web Site: http://www.multiplexusa.com/
Phone: 858-748-6948


 
Postal Address:
Multiplex
12115 PAINE STREET
POWAY, CA 92064  








Click here for Units of Measure Conversion Calculators