View Larger Picture

Parts Express Eligible:	Yes
E-mail This Page To A Friend

                      This is the Spinner for the
               Great Planes 1.60-50CC Reactor ARF, GPMA1420.

FEATURES: Constructed of aluminum, polished natural finish

INCLUDES: One Spinner with Backplate with moutning hardware for the Great
            Planes 1.60-50cc Reactor ARF, part #4.

REQUIRES: Attaching to crankshaft of engine

SPECS:    Length: 3.25" (82.5mm) with backplate
          Diameter: 3.25" (82.5mm)
          Hole Diameter: 3/8" (10mm)

                                                                   lmm 10/30/08
                                                                         ir/jxs

REQUIRES: Radio: 2-Channel with 2 Servos
                 (Recommended but not required high torque servo for steering.)
          Radio Batteries: (8) AA size
          Engine: modelers choice (if required)
          Glow Starter: 1.2 volt
          Paint: Polycarbonate for body
          Misc. Items: Fuel bottle, building and track equipment
          Fuel: 2-cycle glow fuel with 10%-15% nitromethane, --% lubricant-
            Most of the fuels we carry meet or exceed the lubricant content
            required for optimum performance and maximum engine life.  In the
            past, the conventional lubricant content used in fuel was 18%.  But
            with new advanced technologies, fuels like Red Alert and O'Donnell
            for example, have a better quality of lubricants even though the
            percentages of lubricant content are lower.  These high-tech
            lubricants provide exceptional cooling and protection.

SPECS:      Vehicle-
          Length:            . " (   mm)
          Width:             . " (   mm)
          Height:            . " (   mm)
          Weight:         .  lbs (    g)(approx.)
          Wheelbase:           " (   mm)  (wheels on-center front-to-rear)
          Tread- Front-       Rear-       (wheels on-center side-to-side)
          Front Track:       . " (   mm)
          Rear Track:        . " (   mm)
          Ground Clearance:  . " (   mm)
          Gear Ratio:          .  :1
          Tires- Front:        " x  . " (  x  mm)
                  Rear:        " x  . " (  x  mm)
            Body-
          Length:  - / " (   mm)
          Width:   - / " (   mm) at rear wheels (widest point)
                   - / " (   mm) behind from wheels (thinnest point)
          Height:  - / " (   mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location                      Bearing Set Qty.
            (5)  8 x 12mm front & rear diff gears, clutch (use 3 DTXC1581)
(example)   (2)  5 x 11mm front & rear gearbox (use 1 DTXC1547)
            (2) 10 x 15mm front & rear gearbox (use 1 DTXC1595)
            (5)  5 x  8mm clutch, (steering-4 orig. bushings) (use 3 DTXC1523)
            (10) 6 x 12mm gearboxes, axles, drive shaft (use 1 DTXC1571)

          Body pictured on the box is painted (color(s).
                                                            techs initials-date



– If you need more information, use these Great Planes resources –

E-mail: airsupport@greatplanes.com
Web Site: http://www.greatplanes.com/
Phone: 217-398-8970


 
Postal Address:
Great Planes
3002 N. APOLLO DRIVE, SUITE #1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators