View Larger Picture

E-mail This Page To A Friend

This is the Associated LRP ZR.21X 1/8 scale off-road Buggy and Truggy Engine.

FEATURES: Tuned for competition racing
          Slide valve lightweight composite/aluminum/steel carburetor with 7mm
            8mm and 9mm inserts, 9mm offers the most power-7mm offers best fuel
            economy
          ABC piston and liner construction "A"luminum piston fitted to a
            "B"rass cylinder liner that is "C"hrome plated
          Five intake and one exhaust port
          14mm SG (pilot) crankshaft with special turbo scoops
          Fork shaped aluminum connecting rod with double bushings
          Fully CNC machined high silicium alloy piston
          Ten fin blue aluminum anodized cooling head
          Ninety day limited warranty

INCLUDES: LRP ZR.21X Buggy and Truggy Engine with slide valve carburetor, 7mm,
            8mm and 9mm carb inserts, silicone rubber exhaust gasket for Force
            and Novarossi manifolds and instruction sheet

REQUIRES: Fuel: 2-stroke car fuel w/25% nitro content (never exceed 36% nitro)
          Glow Plug: Hot turbo type
          Exhaust System and Air Filter: Depending on vehicle

SPECS:    Displacement: .21 cu in (3.49cc)
          Exhaust: Rear
          Bore: 16.26mm
          Stroke: 16.80mm
          Power Output: 2.71 PS
          Max RPM: 35,400 (may vary depending on fuel, exhaust system & tuning)
          Weight: 12oz (340g)
          Distance Between Mounting Holes Same Side:          0.83" (21mm)
          Distance Between Mounting Holes Opposite Side:      1.5" (37mm)
          Height Bottom of Mounting Tab/Top of Cylinder Head: 3.7" (95.5mm)
          Height Bottom of Crankcase/Top of Cylinder Head:    4.4" (111mm)
          Cylinder Head Diameter:                             2.2" (54.8mm)
          Width of Mounting Tabs:                             1.7" (44.2mm)
          Length from Backplate to Front Bearing:             2.5" (64mm)
          Length from Backplate to End of Crankshaft:         3.7" (93.5mm)
            Carburetor Settings;
         Mid Range Needle: 5.5 turns from closed
         Main Needle: 6 turns from closed
         Idle Screw: Open 0.5 - 1.0mm from closed

                                                                   jxs 10/24/08
                                                                         ir/jxs



– If you need more information, use these Associated resources –

Web Site: http://www.rc10.com/
Phone: 949-544-7500


 
Postal Address:
Associated
26021 COMMERCENTRE DR
LAKE FOREST, CA 92630  








Click here for Units of Measure Conversion Calculators