View Larger Picture

Parts Express Eligible:	Yes
Tower Catalog Page:	93
E-mail This Page To A Friend

          This is the Master Airscrew 13x8 3-Blade Pusher Propeller.

FEATURES: Constructed of glass filled nylon for strength and durability
          NACA airfoil
          Scale look and true pitch
          Accurately balanced to create a greater thrust at lower RPM

SPECS:    Diameter: 13" (33cm)
          Pitch:     8" (20cm)

COMMENTS: The general rule for converting a 2 blade prop to a 3 blade is to
            subtract 1" from Diameter OR subtract 1 from Pitch.
          Pusher propellers are designed for airplanes that have the engine
            facing backwards in the rear of the plane, PUSHING the airplane
            forward.

          PER MASTER AIRSCREW: All 3- and 4-blade props are balanced
            dynamically at the factory prior to drilling. The mounting holes
            are then drilled slightly off center, if required, to properly
            balance the propeller. As such, the mounting hole may be slightly
            off center. Master Airscrew assures us this is perfectly normal
            and will not cause problems during use.

                                                                    jxs 9/09/08
                                                                         ir/jxs



– If you need more information, use these Master Airscrew resources –

Web Site: http://www.masterairscrew.com/
Phone: 916-631-8385


 
Postal Address:
Master Airscrew
MASTER AIRSCREW/WINDSOR PROPELLER
PO BOX 250
RANCHO CORDOVA, CA 95741  








Click here for Units of Measure Conversion Calculators