This is the 1/10 scale, brushless electric powered, radio controlled, RTR
HPI On-Road Sprint 2 Touring Car with the 1966 Mustang GT Body.
FEATURES: Chassis: 3/16" (4mm) plastic
Drive: Four wheel belt drive
Motor: HPI Warp 5700 brushless motor with Neodymium magnet, oversized
sealed bearings and slotless stator design for smooth linear torque
Radio: HPI TF-1 pistol grip AM 27MHz with steering and trim
and reverse and SF-1 steering servo, transmitter does not have
charge jack
Electronic Speed Control: HPI Flux Motiv sensorless, brushless and
compatible, Deans male plug
Ball Bearings: Full set, rubber sealed
Shocks: Oil-filled, plastic bodied
Differentials: Planetary gear, sealed
Transmission: Single speed with Flux optimized gearing
Tires: Rubber, vintage street tread pattern
Front, 1.02" (26mm) width, 1.9" (48mm) diameter
Rear, 1.2" (31mm) width, 1.9" (48mm) diameter
Wheels: 8-spoke silver plastic 1.7" (44mm) diameter, 1.02" (26mm)
wide
Pinion Gear: Steel 48 pitch
Spur Gear: 48 pitch, composite construction
Body: Polycarbonate painted and trimmed with body trim and light
details and clear plastic windows, clear rear wing
Bumpers: Front, foam
Suspension: Fully adjustable, extra long upper links with new
multiple mounting positions, and adjustable droop
Ackerman: Adjustable, Ackerman describes the effect of the inner
front wheel turning faster than the outer front wheel during turns
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell-crank type with servo saver
INCLUDES: HPI On-Road Sprint 2 Touring Car with the 1966 Mustang GT Body,
Flux Motiv ESC, Warp 5700 brushless motor, painted body, clear wing
2-ch AM pistol grip radio w/steering servo, decal sheet, DVD and
instruction manual
_
REQUIRES: Radio Batteries: (8) AA size
Battery: 6-7 cell or 2-cell with Deans female plug
Battery Charger: or compatible depending on battery
Misc. Items: Building and track equipment
SPECS: VEHICLE-
Length: 17" (431mm)
Width: 7.5" (190mm)
Height: 5" (127mm)
Weight: 2.7lbs (1245g)
Wheelbase: 10.1" (257mm)
Front Track: 7.4" (187mm)
Rear Track: 7.7" (196mm) side to side at outer edges of wheel
Front Tread: 6.3" (160mm)
Rear Tread: 6.6" (169mm) side-to-side at wheel centers
Ground Clearance: 0.35" (9mm)
BODY-
Length: 17.6" (448mm)
Width: 7.2" (183mm)
Height: 4.4" (112mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x10mm Fr Wheels 2 DTXC1535
4 5x10mm Rear Wheels 2 DTXC1535
2 5x8mm Fr Diff 1 DTXC1523
2 5x8mm Rear Diff 1 DTXC1523
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
1 4x8mm Spur Gear Mount 1 DTXC1511
2 4x8mm Servo Saver 1 DTXC1511
2 4x8mm Middle Lay Shaft 1 DTXC1511
Body pictured on the box is painted red.
It is not possible to request a specific radio channel because they
are supplied by the manufacturer at random.
jxs 10/03/08
ir/jxs
Click here for Units of Measure Conversion Calculators
|