This is the 1/8 scale glow powered, radio controlled,
O'Donnell Z01-T off-road Truggy Kit.
The Z01-T is a full competition race truggy designed to
compete on National and International levels.
The Z01-T is geared toward high-end racers and is completely tunable
to any driving style and all track conditions.
**Additional Technical Info Will Be Added When It Becomes Available.**
FEATURES: Chassis: Lightweight machined 7075 T6 hard anodized aluminum
with carbon fiber servo tray, front plate and center diff top plate
Drive: Four wheel drive, shaft drive with nickel plated steel front
and rear CV driveshafts and outdrives
Engine Mount: Aluminum heatsink type
Fuel Tank: Race legal 5.0oz (150cc), with splash guard, two high-
volume fuel filters
Clutch: Three aluminum shoes
Transmission: Single speed
Ball Bearings: Full set included, rubber sealed
Shocks: Four oil-filled Big Bore with polished 4mm diameter shafts,
CNC machined aluminum bodies and lightened aluminum shock towers
Main Gear: -- tooth,
Gearbox: Sealed front and rear
Differentials: Planetary geared, with sintered metal gears
Brakes: Dual disk with adjustable bias, oversized front disc, heat-
treated hardware and extra thick brake
Wheels: --" ( mm) wide, --" (mm) diameter
Body: Low profile, constructed of molded polycarbonate, nylon wing
Bumpers:
Suspension: Fully adjustable with three sets of shock springs, three
sets of swaybars for multiple tuning options, Precision Pivot
System arm mounts for smooth non-binding action, captured hinge
pins eliminate troublesome E-clips
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Inboard arm and linkage lowers CG and protects against
side impact damage, nickel plated steel steering link
INCLUDES: O'Donnell glow powered Z01-T off-road Truggy Kit, low profile air
filter, -- tooth clutch bell, -- tooth spur gear, instructions,
transponder mount
REQUIRES: Radio: 2-3 channel
Radio Batteries: (8) AA size
Engine: .21-.28 cu in (3.4- 4.6cc) racing engine
Tires:
Glow Starter: 1.2 volt
Shock absorber and differential oil
Paint: Polycarbonate for body
Misc. Items: Fuel bottle, building and track equipment
Fuel: 2-cycle glow fuel with 20%-30% , 16% lubricant-
Most of the fuels we carry meet or exceed the lubricant content
required for optimum performance and maximum engine life. In the
past, the conventional lubricant content used in fuel was 18%. But
with new advanced technologies, fuels like Red Alert and O'Donnell
for example, have a better quality of lubricants even though the
percentages of lubricant content are lower. These high-tech
lubricants provide exceptional cooling and protection.
SPECS: Vehicle-
Length: 23" (585mm)
Width: 16.5" (420mm)
Height: 8" (205mm)
Weight:
Wheelbase: 14.5" (375mm) wheels on center front-to-rear
rear
Front and Rear Tread: wheels on-center side-to-side
Front and Rear Track: 14" (355mm) outer edges of wheels side-to-side
Ground Clearance: " ( mm)
Gear Ratio: . :1
Body-
Length:
Width:
Height:
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
3 8x16mm Rear Diff 2 ODOC1550
3 8x16mm Spur/Diff Gears 2 ODOC1550
2 8x16mm Rear Diff Joint 1 ODOC1550
4 8x16mm Rear Outdrives 2 ODOC1550
2 8x16mm Front Diff 1 ODOC1550
4 8x16mm Front Hubs 2 ODOC1550
4 6x10mm Steering Assembly 2 ODOC1555
2 5x10mm Clutch 1 ODOC1560
2 5x8mm Brake Cam 1 ODOC1565
jxs 9/28/08
update jaw 5/11/09
Click here for Units of Measure Conversion Calculators
| 
Eligible: Yours for 3
E-mail This Page To A Friend
Primary Accessories
Primary Accessories
