This is the radio controlled, electric powered, 1/10 scale
Tamiya TRF416 World Edition Touring Car Chassis Kit.
FEATURES: Chassis: 0.09" (2.25mm) thick lower deck with 0.08" (2mm) thick upper
deck,
Drive: Four wheel belt drive with front one-way, center direct drive
and real ball diff
Transmission: Single speed
Shocks: Oil filled, aluminum bodied with white springs and 0.12"
(3mm) thick carbon shock towers
Wheels: White dish 1.9" (48mm) diameter, 0.94" (24mm) wide, 0° offset
12mm hex
Differentials: Ball type
Ball Bearings: Full set, teflon sealed
Spur Gear: Plastic, 105 tooth
Suspension: Double wishbone with front and rear stabilizers
Bumper: Front, constructed of foam
Steering: Bellcrank type with servo saver
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
INCLUDES: Tamiya TRF416 Touring Car Chassis, wheels, shocks, shock oil, spur
gear and instruction manual
REQUIRES: Radio: 2-ch with one standard servo
Speed Control: Compatible with selected motor
Battery: 6-Cell Saddle Pack
Radio Batteries: 8-AA for transmitter
Motor: Tamiya Super Stock TZ, RZ or BZ series recommended
Pinion Gear: Depending on selected motor
Tires: 24mm slick
Body: Touring car type
Battery Charger: Timed or peak for selected battery
Paint of modeler's choice
Misc. Building and track equipment
SPECS: Specs such as size and weight were not provided by manufacturer
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Ball Diffs 1 DTXC1595
2 5x8mm Ball Diffs 1 DTXC1523
2 4x8mm flanged Spur Gear 1 DTXC1517
2 10x15mm Fr One-Way Pulley 1 DTXC1595
4 5x10mm Fr Axles 1 DTXC1535
4 5x10mm Rear Axles 1 DTXC1535
jxs 12/11/08
ir/jxs
Click here for Units of Measure Conversion Calculators
|