View Larger Picture

Tower Catalog Page:	107
E-mail This Page To A Friend

          This is the 1/10 scale, electric powered, radio controlled
                         Tamiya F103RM Race Car Kit.

FEATURES: Chassis: FRP, fiber reinforced plastic 0.10" (2.5mm) thick
          Drive: Rear wheel direct drive with height adjustable gear case
          Motor: Tamiya 540-J stock motor
          Differential: Ball type
          Suspension: Front; independent king pin coil spring, Rear; friction
            shock and coil springs attached to T-bar, rear suspension ball
            mount
          Shock: Single friction type horizontally mounted at rear suspension
          Ball Bearings: Full set
          Body: Clear, untrimmed polycarbonate
          Wings: Front and rear, molded in dark blue plastic
          Spur Gear: Plastic, 63 tooth
          Pinion Gear: 17 tooth aluminum
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Tires: Front; foam  2.2" (57mm) diameter, 1.1" (29mm) wide
                 Rear; foam 2.4" (60mm) diameter,  1.4" (37mm) wide
          Wheels: Plastic 5-spoke, black in color, Front; 1.4" (36mm) diameter
            1.2" (30mm) wide, Rear; 1.4" (36mm) diameter, 1.7" (44mm) wide
          Steering: Bell crank type with servo saver, steering servo is
            longitudinally placed to apply an isometric steering load

INCLUDES: Tamiya F103RM Race Car Kit with 540 motor, pinion gear, spur gear,
            tires, wheels, body, front and rear wings, friction shock, decal
            sheet and instruction manual

REQUIRES: Radio: 2-channel with one servo
          Electronic Speed Control: For stock motor
          Battery: 6-cell 7.2V stick NiCD or NiMH (7-cell will not fit)
             OR 2S LiPo battery
          Charger: Depending on battery type
          Misc Items: Tools and track equipment

SPECS:      Vehicle-
          Specs such as dimensions and weight for finished kit not provided by
            manufacturer
            Body-
          Length: 13.5" (343mm)
          Width:  6"    (152mm) at widest point
          Height: 3.5"  (89mm)

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.   Bearing Set
             4   5x8mm     Front Wheels             2       DTXC1523
             2   10x6mm    Rear Wheels              1       DTXC1561
             3   8x12mm    Ball Diff                2       DTXC1581

                                                                   jxs 02/04/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators