View Larger Picture

Tower Catalog Page:

107

          This is the 1/10 scale, electric powered, radio controlled
                  Tamiya F103R 15th Anniversary Chassis Kit.

FEATURES: Chassis: Lower plate-carbon fiber 0.12" (3.2mm) thick, upper plate
            0.06" (1.5mm) thick with pad printed logos, carbon fiber T-bar
            bridge
          Drive: Rear wheel direct drive
          Differential: Ball type with height adjustable aluminum housing
          Motor: Tamiya 540-J stock motor
          Suspension: Front; independent king pin coil spring, Rear; friction
            shock and coil springs attached to T-bar, rear suspension ball
            mount
          Shock: Single TRF oil-filled horizontally mounted at rear suspension
          Ball Bearings: Full set
          Spur Gears: Two plastic, 104 tooth and 93 tooth, 04 pitch
          Pinion Gear: 25 tooth aluminum, 04 pitch
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Camber: Non-adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Tires: Front; foam  2.2" (57mm) diameter, 1.1" (29mm) wide
                 Rear; foam 2.4" (60mm) diameter,  1.4" (37mm) wide
            premounted to wheels
          Wheels: Plastic black in color, Front; 1.4" (36mm) diameter
            1.2" (30mm) wide, Rear; 1.4" (36mm) diameter, 1.7" (44mm) wide
          Steering: Bell crank type with high torque servo saver, steering
            servo is longitudinally placed to apply an isometric steering load
          Servo Mount: Anodized aluminum, blue in color

INCLUDES: Tamiya F103R Chassis Kit, pinion gear, spur gear, 540 stock motor
            tires, wheels, FRP shock, decal sheet and instruction manual

REQUIRES: Radio: 2-channel with one servo
          Electronic Speed Control: For included stock motor
          Body: For F103R chassis, TAMC2629
          Motor: 540 size
          Battery: 6-cell 7.2V stick NiCD or NiMH (7-cell will not fit)
             OR 2S LiPo battery
          Charger: Depending on battery type
          Misc Items: Tools and track equipment

SPECS:      Vehicle-
          Specs such as dimensions and weight for finished kit not provided by
            manufacturer

COMMENTS: For Replacement Ball Bearings use:
            Qty.  Size      Location               Qty.   Bearing Set
             4   5x8mm     Front Wheels             2       DTXC1523
             2   10x6mm    Rear Wheels              1       DTXC1561
             3   8x12mm    Ball Diff                2       DTXC1581

                                                                   jxs 02/05/09
                                                                         ir/jxs



– If you need more information, use these Tamiya resources –

E-mail: us_support@tamiya.com
Web Site: http://www.tamiya.com/
Phone: 800-826-4922


 
Postal Address:
Tamiya
36 DISCOVERY WAY SUITE 200
IRVINE, CA 92618  








Click here for Units of Measure Conversion Calculators