This is the electric powered, radio controlled, 1/12 scale
Tamiya TamTech-Gear Porsche Type 935 Turbo RSR On-Road Car Kit.
FEATURES: Chassis: GT-01 lightweight semi-monocoque design
Drive: Two wheel rear drive with universal drive shafts
Motor: 370 size
Shocks: Four plastic bodied, friction (not oil filled)
Suspension: Four wheel double wishbone inboard suspension with
special horizontally mounted front shocks
Ball Bearings: Full set
Wheels: Rear, .98" (25mm) wide, 1.45" (37mm) diameter
Front, 0.79" (20mm) wide, 1.45" (37mm) diameter gray plastic
Tires: Rear, .94" (24mm) wide, 2.12" (54mm) diameter
Front, .74" (19mm) wide, 2.12" (54mm) diameter rubber slicks
Spur Gear: 64 tooth
Pinion: 16 tooth nylon installed (12, 14, and 18 tooth spares
included)
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Body: Clear untrimmed, constructed of polycarbonate with reverse
body mount system to maintain clean lines, rear wing, driver figure
and side mirrors, all sponsor decals and body trim
Transmission: Ball differential with full ball bearings and
adjustable slipper clutch
INCLUDES: Tamiya TamTech-Gear Porsche Turbo Type 935 RSR, 370 size motor,
instruction manual, driver figure, friction shocks, body with
separately molded side mirrors, body trim and wing
REQUIRES: Radio: 2-channel with one mini size steering servo
Radio Batteries: 8 AA for transmitter
Electronic Speed Control: For 370 size motor
Battery: 7.2V 6-cell stick pack
Battery Charger: Timed or peak for 6-cell battery
Building and track equipment
SPECS: Vehicle-
Length: 14" (356mm)
Width: 6.6" (168mm)
Height: 3.7" (95mm)
Weight: 21.4oz (606g)
Body-
Length: 14.2" (360mm)
Width: 7.1" (180mm) at rear wheels, widest point
5.5" (140mm) behind front wheels, narrowest point
Height: 3.3" (83mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 3x6mm Counter Gear 1 DTXC1503
2 8x12mm Ball Diff 1 DTXC1581
2 4x8mm Gearbox 1 DTXC1511
4 8x12mm Rear Axles 2 DTXC1581
4 5x8mm Steering Assembly 2 DTXC1523
4 8x12mm Front Axles 2 DTXC1581
To paint body to match photos on box, the following Tamiya colors are
recommended;
PS-1 White TAMR8601 TS-29 Gloss Black TAMR5029
PS-2 Red TAMR8602 TS-26 Pure White TAMR5026
jxs 12/12/08
ir/jxs
Click here for Units of Measure Conversion Calculators
|