View Larger Picture

E-mail This Page To A Friend

      This is the 1/10 scale electric powered, radio controlled, on-road
             Outlaw Sprint Car Kit from Custom Works R/C Products.
              Recommended for modelers 16 years of age and older.

FEATURES: Chassis: 0.14" (3.5mm) thick fiberglass
          Drive: Rear wheel
          Cage Assembly: Constructed of plastic, quick release
          Shock Towers: Molded plastic
          Shocks: Four oil-filled MDX long, aluminum bodied with coil over
            spring
          Transmission: Stealth type, with adjustable slipper clutch, mounts
            in either rear or mid-motor configuration and is easily switchable
          Differential: Ball type
          Tires: Street Trac Front, 1" (26mm) wide, Rear, 1.2" (32mm) wide
            both 2.8" (72mm) outer diameter, foam inserts
          Wheels: Dish style Front, 1" (26mm) wide, Rear, 1.2" (32mm) wide
            both 2" (51mm) diameter, gray in color
          Battery Mount: Plastic cradle molded for six cells and nylon strap
            to hold cells, multiple chassis mounting positions
          Caster: Adjustable front and rear, caster/toe-in refers to the angle
            of the front suspension when viewed from the side of the car in
            relation to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Sliding rack with servo saver
          Spur Gear: 48 pitch 81 tooth composite construction

INCLUDES: Outlaw Sprint Racing Chassis Car Kit with small tube of diff grease,
            spur gear, tires, wheels, foam inserts, clear body with side panels
            and instruction manual

REQUIRES: Radio: 2-channel with one standard size servo
          AA Batteries: 8 for transmitter
          Motor: 05 size
          Pinion Gear: 48 pitch to match spur gear, 21-23 tooth is good
            starting point
          Electronic Speed Control: Compatible with number of turns of selected
            motor
          Battery: 6-cell
          Battery Charger: Timed or peak for 6-cell pack
          Building and track equipment

SPECS:    Dimensions are not provided. Contact manufacturer for further info.

COMMENTS: For Replacement Ball Bearings use:
              Qty.  Size      Location              Qty.   Bearing Set
               4  3/16x3/8"   Fr Bearing Carrier     2      DTXC1423
               4  3/16x3/8"   Rear Bearing Carrier   2      DTXC1423
               4  3/16x3/8"   Transmission           2      DTXC1423
               2  3/8x5/8"    Transmission           1      DTXC1437

                                                                    jxs 2/02/09
                                                                         ir/jxs



– If you need more information, use these Custom Works resources –

E-mail: customworkstech@aol.com
Web Site: http://www.customworksrc.com/
Phone: 704-489-8147


 
Postal Address:
Custom Works
760-B CROSSPOINT DRIVE
DENVER, NC 28037  








Click here for Units of Measure Conversion Calculators