View Larger Picture

E-mail This Page To A Friend

       This is the 1/10 scale glow powered, radio controlled, on-road
             Outlaw Sprint Car Kit from Custom Works R/C Products.
              Recommended for modelers 16 years of age and older.

FEATURES: Chassis: 0.14" (3.5mm) thick aluminum.
          Drive: Rear wheel
          Cage Assembly: Constructed of plastic, quick release
          Shock Towers: Molded plastic
          Shocks: Four oil-filled MDX long, aluminum bodied with coil over
            spring
          Transmission: Stealth type, with adjustable slipper clutch, mounts
            in either rear or mid-motor configuration and is easily switchable
          Differential: Ball type
          Brake: Single disc composite
          Clutch: Two, composite construction
          Fuel Tank: 2.5oz (75cc)
          Tires: Street Trac Front, 1" (26mm) wide, Rear, 1.2" (32mm) wide
            both 2.8" (72mm) outer diameter, foam inserts
          Wheels: Dish style Front, 1" (26mm) wide, Rear, 1.2" (32mm) wide
            both 2" (51mm) diameter, gray in color
          Caster: Adjustable front and rear, caster/toe-in refers to the angle
            of the front suspension when viewed from the side of the car in
            relation to the chassis
          Camber: Adjustable, camber refers to the angle of the tops of the
            tires from vertical when viewed from front or behind vehicle
          Steering: Sliding rack with servo saver
          Spur Gear: Composite contruction 66 tooth, 32 pitch

INCLUDES: Outlaw Sprint Racing Chassis Car Kit with tube of diff grease, spur
            gear, tires, wheels, foam inserts, clear body with side panels,
            fuel tank and instruction manual

REQUIRES: Radio: 2-channel with one standard size servo
          AA Batteries: 8 for transmitter
          Engine: .12 cu in (2.0cc) rear exhaust
          Electric Starter: Hand held or starter box
          Building and track equipment: Glow fuel, glow starter, fuel bottle
            and more

SPECS:    Dimensions are not provided. Contact manufacturer for further info.

COMMENTS: For Replacement Ball Bearings use:
              Qty.  Size             Location                Qty.   Bearing Set
               4  3/6x3/8"          Fr Bearing Carrier        2      DTXC1423
               4  3/6x3/8"          Rear Bearing Carrier      2      DTXC1423
               4  3/6x3/8"          Transmission              2      DTXC1423
               2  3/8x5/8"          Transmission              1      DTXC1437
               1  5x10mm            Clutch                    1      DTXC1535
               1  3/16x3/8 flanged  Clutch                    1      CSWC4439

                                                                    jxs 2/02/09
                                                                         ir/jxs



– If you need more information, use these Custom Works resources –

E-mail: customworkstech@aol.com
Web Site: http://www.customworksrc.com/
Phone: 704-489-8147


 
Postal Address:
Custom Works
760-B CROSSPOINT DRIVE
DENVER, NC 28037  








Click here for Units of Measure Conversion Calculators