This is the Novak Pro HV 6.5 Brushless Motor Conversion kit for the
             Cen Racing C-1 Matrix 1/8 scale glow powered buggy.

FEATURES: Includes all necessary conversion components specifically for Cen
            Racing 1/8 scale buggies including a specially designed motor
            plate, two battery boxes and Mod 1 hardened steel pinion gear

            HV6.5 High-Voltage Brushless Motor (NOVC3526)
          Replaces two 550 size brushed motors
          Rugged 5mm diameter output shaft
          Sensor based for excellent starting torque, controlled low speed
           drivability and consistent braking
            HV Pro ESC (NOVM3221)
          Three throttle profiles two with reverse and one with forward/brake
          Locked rotor detection circuitry
          Smart-Stop LiPo cut-off circuitry
          Thermal overload protection

INCLUDES: HV6.5 High-Voltage Brushless Motor, HV Pro ESC, two cooling fans, 11
            tooth mod 1 pinion gear (NOVC5100), motor heat sink with adapter
            plate, two battery boxes, thermal paste, antenna mount, hardware,
            Y-harness and instructions

REQUIRES: Installing on vehicle chassis following instructions in manual

SPECS:    HV6.5 Brushless Motor-
            Number of Turns: 6.5
            Design: Sensor-based
            Input Voltage: up to 14 cells (1.2V/cell) or 2S-4S LiPo cells
            Magnet: One-piece, multi-pole neodymium
            Watts: 730
            KV (unloaded): 3,400
            Length: 2.4" (72.1mm)
            Diameter: 1.41" (35.8mm)
            Shaft Diameter: 5 mm
            Weight: 8.36 oz (295g)
          HV Pro ESC-
            Input Voltage: 6-14 cells (1.2 volts/cell) or 2S-4S LiPo cells
            Size: 1.75 x 2.17 x 0.85" (44.5 x 55.1 x 21.6mm)
            Weight (without wires): 4.76 oz. (135g)
            Throttle Programs: 3 (2 with reverse, 1 without)
            Heavy-duty BEC 6 Volts/3 Amps
            Rated Current: 400 Amps/phase @ 25°C MOSFET Temp.
            On-Resistance: 0.0013 ohms per phase
            Braking Current: 400 Amps/phase @ 25°C MOSFET Temp.
            Power Motor/Battery Wire: 14-Ga Super-Flex Copper-Strand Silicone
            Motor Limit: Any Novak sensor-based 550-size Brushless
            LiPo Cut-Off Voltage: 6.25V (2S), 9.375V (3S), 12.5V (4S)

COMMENTS: See individual stock numbers for more info on components.

                                                                    jxs 5/06/09
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators