This is the Novak Brushless Conversion Kit with the HV Pro 6.5 Motor and ESC
        for the Kyosho Inferno 777, 777 SP-1, SP-2 and SP-2 WC Buggies.

FEATURES: Electric conversion offers a lower center of gravity, less
            maintenance, a cleaner quieter environment and better performance
            HV6.5 High-Voltage Brushless Motor
          Replaces two 550 size brushed motors
          Rugged 5mm diameter output shaft
          Sensor based for excellent starting torque, controlled low speed
            drivability and consistent braking
          HV-Pro High Voltage Brushless ESC
            Three built-in throttle programs with one-touch set up FWD/BRK/REV,
            FWD/BRK, FWD/BRK/25%REV
            Built-in Smart-stop LiPo cut off for safe operation with LiPo
            batteries-cuts throttle at critical voltage
            Dual battery inputs with factory installed connectors

INCLUDES: Cooling fan, wire harness, two battery box straps, battery box, heat
            sink paste, motor heat sink, hardware kit, 11 tooth pinion gear,
            6.5 HV brushless motor, HV Pro ESC and instruction sheets

REQUIRES: Installing all components onto chassis of vehicle following
            instructions in manual

SPECS:    HV 6.5 Motor (NOVC3526);
            Length: 2.84" (72.1mm)
            Diameter: 1.41" (35.8mm)
            Weight: 8.36oz (295g)
            Shaft Diameter: 5mm (compatible with Novak Mod 1 (5100-5110)
             and 32p (5152-5157) pinion gears with 5mm bore
            Input Voltage: Up to 14 cells (1.2V/cell)
            Watts: 730
            kV (unloaded): 3,400 RPM/volt
            Kt: 0.76 oz-in/A
            Power Output: 375 watts @ 14.4V
            Commutation: Sensor based Electronic
            Magnet: Nickle plated high strength Neodymium
          HV-Pro High Voltage Brushless ESC (NOVM3221)
            Input Voltage: 6-14 cells (1.2V DC/cell) or 2S -4S LiPo cells
            Forward/Braking/Reverse
            Case Size: 1.75" x 2.17" x 0.85" (44mm x 55mm x 21mm)
            Weight: 4.8oz (135g) without wire
            Weight: 8.4oz (295g) without heat sink
            Throttle Programs: Three
            BEC (Battery Eliminator Circuitry): 6V/3A
            Watts: 375 (14.4V DC)
            ON-Resistance: 0.0013 x 2 Ohms
            Rated Current: 400A/phase @ 25°C MOSFET temp.
            Braking Current: 400A/phase @ 25°C MOSFET temp.
            Max Discrete Steps: 256
            Motor/Battery Wires: 14AWG silicone

COMMENTS: See individual stock numbers for more info on components.

                                                                    jxs 4/20/09
                                                                         ir/jxs



– If you need more information, use these Novak resources –

E-mail: cs@teamnovak.com
Phone: 949-833-8873


 
Postal Address:
Novak
17032 ARMSTRONG AVENUE
IRVINE, CA 92614  








Click here for Units of Measure Conversion Calculators