This is the glow powered, radio controlled, 1/8 scale
Ofna Jammin' X2-Pro Off-Road Buggy Kit.
This Jammin' X2-Pro Buggy has the following new performance hop-ups;
Front & Rear Carbon Fiber Shock Towers, Radio Tray, Front Top Plate,
& Center Diff Mount Top Plate
7075 Aluminum Center Drive Shafts
Anti Fade Fiber Front and Rear Disc Brakes
CNC Machined Anodized Aluminum Fr & Rear Chassis Stiffeners and more
FEATURES: Chassis: CNC machined hard coated 7075 aluminum .12" (3mm) thick,
smooth bottom, machined on top so engine, fuel tank & differentials
can sit lower into chassis, carbon fiber radio tray, front plate
and center diff mounting plate, CNC machined hard anodized
aluminum front and rear chassis stiffeners
Drive: Four wheel shaft drive with 7075 aluminum center driveshafts
and Lunsford titanium turnbuckles, steel alloy universals
Fuel Tank: 5.1oz (150cc) approximate
Transmission: Single speed
Ball Bearings: Full set, rubber sealed
Shocks: Four oil filled 16mm big bore with 3.5mm shafts, aluminum
shock standoffs
Shock Towers: Carbon fiber
Main Gear: 44 tooth, steel construction
Clutch Bell: 13 tooth, steel construction with twin 5x10mm bearings
Gearboxes: Sealed front and rear
Suspension: T-bolt kingpin type with captured hinge pin design with
locknuts-no E-clips needed
Universals: Front, rear and center universal drive shafts
Differentials: Bevel gear type with 5000 and 10000 weight oils
Brakes: Front and rear 3mm fiberglass disc
Air Filter: High flow 2-stage
Clutch: Lightweight blue anodized aluminum shoes (3 shoe)
Engine Mounts: Adjustable hard anodized aluminum with cooling fins
Wheels: LPR 3.98" (101mm) diameter, 2.30" (58.3mm) wide, white in
color, 17mm hex
Tires: Pro-Line Revolver, M2 hardness compound, outer diameter 4.5"
(114.3mm), inner diameter: 3.2" (81.28mm), and 1.9" (48.26mm) wide
Inserts: Yellow foam construction, medium firmness
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Body: Clear buggy style, untrimmed
Wing: Plastic construction, molded in white
INCLUDES: Ofna Jammin X2-Pro Buggy kit with tires, wheels, aluminum
shocks, clear body, wing, decals and illustrated instruction manual
REQUIRES: Radio: 2-Channel with 2 (high torque servo for steering)
Receiver Battery: 5-cell hump pack
Radio Batteries: (8) AA size
Engine: .21 w/rear exhaust and pilot shaft (if using a rear exhaust
with full threaded shaft a pilot shaft must be purchased - OFNC1009
Tuned Pipe and Manifold for Rear Exhaust - THPG8015
Glow Starter: 1.2 volt - DTXP3000
Misc. Items: Fuel bottle, building and track equipment
SPECS: Vehicle-
Length: 15.75" (400mm)
Width: 8" (203mm)
Height: 5.25" (133)
Wheelbase: 13.1" (332mm) wheels on-center front-to-rear
Tread- Front- 10.25" (260mm) Rear- 10.25" (260mm)
Front Track: 12" (304mm)
Rear Track: 12" (304mm)
Ground Clearance: 1.25" (31.75mm)
Body- Wing-
Length: 14.2" (361mm) Length: 3.7" (94mm)
Width: 8.7" (220mm) Width: 8.3" (212mm)
Height: 3.75" (95mm) Height: 2.2" (57mm)
COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 8x16mm Fr & Rear Diff 2 DTXC1585
4 8x16mm Fr & Rear Gear Cases 2 DTXC1585
8 8x16mm Fr & Rear Hubs 1 DTXC1587
2 4x8mm flanged Servo Saver 1 DTXC1517
2 5x8mm flanged Brake Assembly 1 DTXC1527
2 5x10mm Clutch 1 DTXC1535
jxs 12/15/08
ir/jxs
– If you need more information, use these Ofna resources – |
E-mail: help@ofna.com
Web Site: http://www.ofna.com/
Phone: 949-586-2910
|
|
Postal Address:
Ofna
7 VANDERBILT
IRVINE, CA 92618
|
Click here for Units of Measure Conversion Calculators
| 
E-mail This Page To A Friend
Primary Accessories
Primary Accessories
