This is the Monster MAXX Wild Wind Motor for the Traxxas E-Maxx Truck.
This optional motor replaces the stock motor 19 turn motors.
FEATURES: 550 size motor can
19 Turns
Single wound
Machine wound
Standup brushes w/eyelet terminals
Pure Copper Brush Hood for low resistance
6.2 XL wet magnets
Three SMC (Surface Mounted Capacitors) pre-installed
Longer Armature for more torque
Dual Ball Bearings
Adjustable Timing
INCLUDES: One MAXX Wild Wind Motor
One instruction sheet
REQUIRES: Solder on speed control wires or attach motor spade connectors.
SPECS: Turns: 19
Winds: single
Motor Can Length: 2.5"
Diameter: 1.42"
Shaft Diameter: 1/8" (.125")
Shaft Length: 1/2" (.50")
Voltage: 14v
Capacitor value: 0.1uf
COMMENTS: The E-Maxx uses two motors. Two motors with the same amount of
turns must be used together to avoid damage to the drivetrain.
Will work with other 1/10th scale cars and trucks.
According to the instructions, motor does not require break-in. If
however you elect to change to a different type of brush, follow
that brush manufacturers' recommendations for break-in.
To upgrade this motor to the "Pro" specs when rebuilding it, use
RC4380 brushes and RC4036 extra heavy springs.
Motor comparison:
Traxxas Original: 23 turn, single, 14 volt
Trinity Mild: 21 turn, single, 14 volt
Trinity Wild: 19 turn, single, 14 volt
Trinity Pro: 17 turn, single, 14 volt, hard brushes, heavy-
duty springs
NNA 1/21/01
ir/jl
Click here for Units of Measure Conversion Calculators
|