This is the Pyro 30-12 Outrunner Brushless Helicopter Motor from Kontronic.

FEATURES: Designed specifically for helicopters such as the Logo 600, Shark,
            T-Rex 700 Electric, and Alien type helicopters using 10-12S LiPos
          89% inrunner type efficiency in an outrunner design
          10 poles for smooth operation
          Neodymium magnets rated for up to 302°F (150°C)
          Removeable 6mm output shaft
          Integrated fan for optimum airflow through the motor
          Thin stainless steel can
          Thin bearing section for a compact design
          Compatible with Kontronic Jive 80+ HV ESC
          Two year warranty on manufacturer defects

INCLUDES: Kontronik Pyro 30-12 Motor, three sections of shrinkwrap, 4mm male
            bullet connectors, three non-solderable leads and instruction
            manual

REQUIRES: Installing in model and connecting to speed control

SPECS:    RPM/Volt: 510
          Max Cont. Output Power: 3000W, (5000W surge)
          Max RPM: 25,000
          Internal Ohms: 0.027
          Shaft Diameter: 6mm
          Length: 2.4" (61.5mm)
          Diameter: 2" (50.8mm)
          Weight: 13.2oz (375g)

COMMENTS: Do not use motor with traditional brushed-motor speed control or
            connect it directly to a power supply-damage can result.
          The motor wires are part of the internal winding and cannot be
            soldered. Use connectors only.

                                                                    jxs 3/17/09
                                                                         ir/jxs



– If you need more information, use these Kontronik resources –

E-mail: electronicsupport@greatplanes.com
Web Site: http://www.kontronikusa.com/
Phone: 217-398-8970


 
Postal Address:
Kontronik
3002 N. APOLLO DRIVE, SUITE 1
CHAMPAIGN, IL 61822  








Click here for Units of Measure Conversion Calculators